-
The Swivellink Standard range utilises a series of LINKS to extend the reach of the mounting system between knuckle couplers. Where a Link piece is not long enough for needs adapting the SLM-3 Ball Adapter can be used instead. It is a standard 28.5mm ball with a 3/8"-19 BSPT thread so you can attach a pipe of any length! The ball includes machined spanner flats for tightening the pipe on the the adapter. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) Male Tripod Mount is designed to attach to cameras, mounting plates, etc with a standard tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XS can fit Standard Swivellink components by attaching to the SLM-2-2XS coupler adapter. SeeSense also offer a SPECIAL version of this part with a 1/4-20 (1/4"UNC) female thread - SLM-5XSF.The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense modified Swivellink SLM-5XSF Small Ball 1/4"-20 (1/4"UNC) Female Tripod Mount features a 1/4-20 (1/4"UNC) FEMALE thread designed to attach to tripods, magnetic mounting plates, etc with a standard 1/4"UNC male tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XSF can fit Standard Series Swivellink components by attaching to the SLM-2-2XS coupler adapter. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Bushman Panoramic Bender is an arm with double ball head with 1/4" threads designed specifically to allow unlimited adjustment in any direction to the angle of a small VR camera mounted on to a Bushman Panoramic Monopod or Popeye. Each of the two ball heads features an O-ring to prevent any movement from vibration, and can rotate in an arc of up to 260 degree. Both ball heads are locked by a single clamp. IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. They incorporate a 10mm diameter through hole for routing wires, cables, or small hoses. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Small XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. They incorporate a 19mm diameter through hole for routing wires, cables, or small hoses. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Swivellink SLM-3T Standard Series Metric Tee Link The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The SLM-3T Tee link allows you to create two separate branches using a SLM-290 Tee Knuckle connector attached to the centre ball. It incorporates a 19mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 19mm x 38mm slot for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3TSL-15-250 provides the flexibility to adjust or fit a precise link length of between 15 and 25cm long. It incorporates a through hole for routing wires, cables, or small hoses. For example this is ideal if you wanted to be able to adjust the height of a monitor. The design also allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3XST Small XS Series Metric Tee Link allows you to create two separate branches using a SLM-290XS Tee Knuckle connector attached to the centre ball. It incorporates a 10mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 10mm hole for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small camera assembly comprises mounting base, 1/4"-20 camera mount, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 10mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small assembly comprises 2 x mounting bases, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 10mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard assembly comprises 2 x mounting bases, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 19mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Bushman Ground Spike is a simple device that screws into the ground to provide a secure base for attaching cameras, monopods, poles, mounting devices, etc. IN STOCK -
Spare 5 volt, 1200 mAh, 4.44Wh battery for MAPIR Survey3 camera. A battery is supplied with the camera but it is advisable to have a spare! MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Ulanzi BG-3 is a 10,000 mAh Power Handgrip ideal for use with action cameras, smartphones, etc when a grip handle and power are required. The battery is designed for Vlogging, ‘selfie’, video, live streaming, etc.
It can also be used in conjunction with a VR camera and monopod to provide extended battery life and extra weight by the tripod lowering the centre of gravity. IN STOCK -
The V25 / 23Watt-Hour Lithium Polymer battery features two 5V USB output ports, both rated at 2A with a combined total of 3A available. The USB Battery Pack has the critical "Always On" operating mode making it ideal for long-term time-lapse using the CamDo Solutions UpBlink intervalometer or for extending the battery life action cameras including Back-Bone modified GoPro.
The V25 features pass through charging and is optimised for solar charging using Voltaic and other equipment. WE ARE SORRY BUT WE DO NOT SHIP THESE BATTERIES OUTSIDE EUROPE ON BACK ORDER
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu