Mapir DJI Inspire 2 Drone Mounts

Home/Accessories/Mounting Solutions/Mapir DJI Inspire 2 Drone Mounts

There are two mounts available to attach MAPIR Survey3 cameras securely on to the DJI Inspire 2 drone with Tilting Single or Dual camera Mounts.  Each mount comes with camera clips and features a simple two screw installation making it easy to remove and transport.  These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera.

 MAPIR – MAPPING THE INVISIBLE

90.00110.00

Clear

Product Description

MAPIR offer a comprehensive range of tilting and static drone mounts for payloads of up to four MAPIR Survey3 cameras.  These include a series of two lightweight mounts which allow you to attach Mapir Survey 3 cameras securely on to a DJI Inspire 2 drone whilst keeping the original camera installed.

There are two tilting mounts available for Single or Dual camera applications. These Tilting Mounts have a black thumb screw on each side that allows you to adjust the camera’s tilt angle from 0 to 10 degrees to account for the forward flying tilt.  Each notch is equal to 2.5 degrees of tilt.  The advantage of these mounts is that you can tilt the angle of the camera to suit the drone’s forward flight speed.  For every 5m/s you are flying tilt 5 degrees (so 10m/s = 10 degrees).

For applications that use the rear underside camera to check for an unobstructed landing area (such as the DJIGO application) you may not be able to tilt the camera more than 7.5 degrees. You can of course select to force landing though with no issues from the mount. For applications that do not use the ground sensors for landing (such as DroneDeploy) you can use any tilt you require.

A Mapir Survey 3 camera clip is included for each camera.  These mounts also feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. You can remove the vibration dampening balls and rotate the camera plate 90 degrees if desired.  Each mount also features a simple two screw installation making it easy to remove and transport.

Optional lens protectors are recommended to protect the camera lenses from flying debris during take-off and landings.

Material Lightweight Plastic (MJF Nylon) Dyed green
Weight Single Tilting Mount by itself 42g Dual Tilting Mount by itself 50g
Dimensions TBA
    • Ultra lightweight plastic construction
    • Simple camera clip attachment

Lightweight mount for drone
Ideal for multispectral aerial mapping and survey applications

  • Durable and lightweight plastic drone mounting plate
  • Single or dual camera mounting plate
  • Thumbscrews (2)
  • Yellow (medium hardness) vibration dampening balls (4)
  • DJI Inspire2 M2.5 x 10mm setscrews (2)
  • Mapir Survey 3 camera clip for each camera

N.B. We are in no way liable for any damage caused to or by your drone. The mount has been thoroughly tested and when installed properly will not interfere with the normal operation of the drone.

You may also like…

Go to Top