-
The Swivellink Standard range utilises a series of LINKS to extend the reach of the mounting system between knuckle couplers. Where a Link piece is not long enough for needs adapting the SLM-3 Ball Adapter can be used instead. It is a standard 28.5mm ball with a 3/8"-19 BSPT thread so you can attach a pipe of any length! The ball includes machined spanner flats for tightening the pipe on the the adapter. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) Male Tripod Mount is designed to attach to cameras, mounting plates, etc with a standard tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XS can fit Standard Swivellink components by attaching to the SLM-2-2XS coupler adapter. SeeSense also offer a SPECIAL version of this part with a 1/4-20 (1/4"UNC) female thread - SLM-5XSF.The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense modified Swivellink SLM-5XSF Small Ball 1/4"-20 (1/4"UNC) Female Tripod Mount features a 1/4-20 (1/4"UNC) FEMALE thread designed to attach to tripods, magnetic mounting plates, etc with a standard 1/4"UNC male tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XSF can fit Standard Series Swivellink components by attaching to the SLM-2-2XS coupler adapter. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Bushman Panoramic Bender is an arm with double ball head with 1/4" threads designed specifically to allow unlimited adjustment in any direction to the angle of a small VR camera mounted on to a Bushman Panoramic Monopod or Popeye. Each of the two ball heads features an O-ring to prevent any movement from vibration, and can rotate in an arc of up to 260 degree. Both ball heads are locked by a single clamp. IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. They incorporate a 10mm diameter through hole for routing wires, cables, or small hoses. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Small XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. They incorporate a 19mm diameter through hole for routing wires, cables, or small hoses. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Swivellink SLM-3T Standard Series Metric Tee Link The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The SLM-3T Tee link allows you to create two separate branches using a SLM-290 Tee Knuckle connector attached to the centre ball. It incorporates a 19mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 19mm x 38mm slot for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3TSL-15-250 provides the flexibility to adjust or fit a precise link length of between 15 and 25cm long. It incorporates a through hole for routing wires, cables, or small hoses. For example this is ideal if you wanted to be able to adjust the height of a monitor. The design also allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3XST Small XS Series Metric Tee Link allows you to create two separate branches using a SLM-290XS Tee Knuckle connector attached to the centre ball. It incorporates a 10mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 10mm hole for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small camera assembly comprises mounting base, 1/4"-20 camera mount, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 10mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small assembly comprises 2 x mounting bases, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 10mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard assembly comprises 2 x mounting bases, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 19mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Bushman Ground Spike is a simple device that screws into the ground to provide a secure base for attaching cameras, monopods, poles, mounting devices, etc. IN STOCK -
The 3DIO Hardware Mounting Bracket for 3DIO FS, FS-XLR and FS-PRO II series microphones is designed for mounting a small HD sports camera and an external audio recorder. For example it allows you to mount a GoPro type camera in the appropriate relative location to the ears on any of the FS Series Microphones. This bracket is ideal for accurate point-of-view (POV) experiences. IN STOCK -
The Bushman Panoramic Halo Bracket is designed to mount any twin sensor 360° VR camera between two Bushman Panoramic Halo 360 lights which provides enhanced lighting to the scene. The bracket is purpose designed so it along with the Halo lights do not intrude in the image. Simply position the camera so the two lenses are at right angle to the bracket and telescope the bracket to fit your camera. Further details below. IN STOCK -
This swivel mount kit consists of a 15cm straight swing arm attached to a vertical mounting base for attachment to a flat or rounded surface such as a wall or post. At the opposite end is a ball socket used with the 1.5" ball mount plate that can be attached directly to the CamDo DryX enclosure for maximum flexibility. An insert on the vertical mounting plate to allow solid mounting to a flat surface like a building or a rounded surface such as a pole or rail. The mount includes spare lock nuts to replace the knobs for extra security. IN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu