-
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. They incorporate a 10mm diameter through hole for routing wires, cables, or small hoses. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Small XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the 3DR X8 drone with Static Single or Dual camera Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - PLEASE CONTACT US FOR AVAILABILITY -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the DJI Inspire 1 drone with Tilting Single or Dual camera Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLEIN STOCK -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the DJI Inspire 2 drone with Tilting Single or Dual camera Mounts. Each mount comes with camera clips and features a simple two screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLEIN STOCK -
There are seven mounts available to attach MAPIR Survey3 cameras securely on to 3DR Solo drones with a combination of Single, Dual or Quad camera with Static or Tilting Mount options. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
Sale!
This low profile mount is used to attach M12 lenses which will not focus using the standard Back-Bone M12 to CS-mount adapter. It is compatible with all Back-Bone PRO (H8-5) modified GoPro cameras. The Low Profile Mount can be mounted flush or reversed to add more thread to the front of the camera. IN STOCK -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to an Auto EVO drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Single Static mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 1 or 2 drone whilst keeping the original camera installed. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
The Mapir Survey3 Camera Frame Mount allows you to mount a Survey3 camera on to GoPro style 3 pronged mounting brackets and mounting systems. The frame mount consists of the green plastic frame only (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLE SPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3XST Small XS Series Metric Tee Link allows you to create two separate branches using a SLM-290XS Tee Knuckle connector attached to the centre ball. It incorporates a 10mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 10mm hole for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense modified Swivellink SLM-5XSF Small Ball 1/4"-20 (1/4"UNC) Female Tripod Mount features a 1/4-20 (1/4"UNC) FEMALE thread designed to attach to tripods, magnetic mounting plates, etc with a standard 1/4"UNC male tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XSF can fit Standard Series Swivellink components by attaching to the SLM-2-2XS coupler adapter. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) Male Tripod Mount is designed to attach to cameras, mounting plates, etc with a standard tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XS can fit Standard Swivellink components by attaching to the SLM-2-2XS coupler adapter. SeeSense also offer a SPECIAL version of this part with a 1/4-20 (1/4"UNC) female thread - SLM-5XSF.The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-6XS Small Metric XS Series Blank Mounting Plate is designed so you can drill and mount your equipment on to a plate. The SLM-6XS includes drillings to accommodate the SLM-1XS Small Ball Base in a choice of two positions. Two M5 x 12 socket cap setscrews are included for attaching the SLM-1XS. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu