-
Voltaic Systems supply a series of extension cables with waterproof connectors which are primarily designed for connecting their solar panels to a battery. These standard cables are available in lengths of 30cm (1 foot), 1.25m (4 feet) or 3m (10 feet). The incorporate a 3.5 x 1.1mm male and female connector. These connectors also have a shroud which slides over the mating connector to make the cable totally waterproof. IN STOCK -
Voltaic Systems supply a splitter cable which is primarily designed for connecting two of their solar panels to a battery. The splitter cable also integrates directly with Voltaic extension cables. The cable features a 3.5 x 1.1mm male which splits to feed TWO 3.5 x 1.1mm female connectors. The female connectors also have a shroud which slides over the mating connector to make the cable totally waterproof. IN STOCK -
Voltaic Systems have a 5V Regulator USB cable that connects directly to any Voltaic Systems 6 Volt solar panel allowing you to safely charge any USB device, smartphone, or tablet directly from the sun. No battery pack is required, simply charge using your device's USB charging cable. Nice and simple - NO ELECTRONICS REQUIRED! IN STOCK -
The Bushman Camera Holder features a 1/4"-12 UNC male tripod mounting thread that can be screwed directly into the tripod mount of a small camera allowing you to attach it to a strap or small carabiner clip. Keep your action camera, or VR camera safe by wearing it around your neck. The Camera Holder features a rubber pad to help hold the camera tight and protect it from being scratched by the camera holder. IN STOCK -
Use this compact battery charger to charge up to two Survey3 batteries using any available USB port. Input power is via a Mini USB 5V / 2. Output is 2 x 4.2V / 0.75 Amps to the batteries. BATTERIES ARE NOT INCLUDED! MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
The Bushman Monkey Clamp is a simple device that allows you to attach cameras and other equipment securely. The jaws can open to a maximum width of 40mm and have a rubber cover to protect and grip on the surfaces the clamp is attached to. The bracket features 1/4 and 3/8"UNC female standard tripod mounts. IN STOCK -
The Swivellink SLM-CB Table Clamp can be used to mount any Swivellink system on to the edge of a table between 16mm and 35mm thick. A screw with a plastic knob is used to tighten the SLM-CB. Machined from aluminium it includes a variety of drilled holes for fastening Swivellink SLM-1 or SLM-1XS bases to the Table Clamp Base. CONTACT US regarding your requirement IN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
The Swivellink SLM-2 metric grey standard knuckle uses a double socket configuration to clamp to the ball of a standard base, standard link, or standard sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2-2XS is a cross-over metric knuckle adapter designed to connect Standard to XS Series Fittings. It uses a double socket configuration to clamp to the ball of a Standard or XS base, link, or small sensor mount depending on the connection end utilised. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-290 Standard series metric knuckle is designed as a tee connector working in conjunction with the Standard series SLM-3T Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS small metric grey standard knuckle uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS90 small metric grey standard knuckle is designed as a tee connector working in conjunction with the XS series SLM-3XST Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Bushman Panoramic offer a choice of 300 or 400g counterweight with 1/4"Male to Female adapters. They are intended to increase the stability of a Monopod and camera system by lowering its centre of gravity thus making it much less likely to fall over. Simply screw the counterweight directly on to a small tripod using the 1/4"UNC Female connection on the bottom of the counterweight, then attach the Monopod to the 1/4"UNC Male thread on top. Bushman Monopods include a counterweight; add more for increased stability. IN STOCK -
The MAPIR T3-R125 Diffuse Reflectance Calibration Ground Target Package contains a series of 4 reflectance targets with known reflectance curves. UNLIKE drone "sunlight sensors" this target allows users to obtain accurately repeatable calibrated images through the seasons and in differing weather / lighting conditions. This target can be used for calibrating images with Mapir and any other brand of multispectral camera. A smaller T3-R50 target is also available. Before commencing a crop mapping survey cameras should capture an image of the entire target. This can then be used to help calibrate images captured in the image processing software. We therefore highly recommend that you purchase the Mapir Camera Reflectance Calibration Target to complete your system. MAPIR - MAPPING THE INVISIBLEIN STOCK DISCOUNTED PRICING AVAILABLE IN OUR MAPIR BUNDLES - CONTACT US
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu