-
SeeSense USB-C to USB-C 70cm OTG cable system designed to connect a CamDo UpBlink intervalometer to GoPro HERO 10, 11 & 12 cameras. This new improved cable is labelled "UP" to show which end of the cable connects to the UpBlink ("UP" also means this way up). This cable is also supplied with CD-180319K UpBlinks for use with GoPro Hero 10, 11 & 12 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
This custom fully pinned USB-C to USB-C cable from CamDo Solutions is designed for use with the CamDo UpBlink intervalometer connecting to GoPro HERO 5, 6 7 and 8 cameras. The cable is 30cm long and allows a CamDo UpBlink intervalometer to interface with a GoPro camera. This cable is also supplied with CD-180310K UpBlink kits for use with GoPro Hero 5 - 8 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
This custom OTG cable is used for updating Blink firmware. It enables the Blink to act as the host, with the USB flash drive as a peripheral that can be accessed by Blink to update the controller from a file on the drive. The USB-A connection is used to power the Blink Intervalometer and flash drive.Contact SeeSense for Further InformationLIMITED REMAINING STOCK -
This custom Sony Multiport to USB-C cable from CamDo Solutions is designed for use with UpBlink to allow control of compatible Sony DSC-RX0 and DSC-RX0 II cameras. The cable is 15cm long and can be used as an upgrade purchase if you already own an UpBlink with cable for GoPro cameras. Simply update the CamDO UpBlink firmware to the latest version and now you can capture ling-term time-lapse with the superior Sony DSC-RX0 camera. Contact SeeSense for Further Information IN STOCK -
Replacement Canon EXC-3 Series Camera - Control Unit cables are high quality flexible cables available in 3, 6, 10 or 15 metre lengths. They should be used with Canon (formerly Toshiba) IK-4K, IK-HD5, IK-HD3 and IK-HR3 cameras. -
Sale!
This Entaniya 3D Stereo VR Rig is specially designed for Back-Bone modified GoPro Hero 5, Hero 6 and Hero 7 cameras fitted with Entaniya 220 or 250 degree lenses. The system creates a lightweight VR180 Stereo camera system whilst retaining the ability to use the cameras for other purposes. The rig has a stable and accurate interocular distance of 65mm (the average distance between adult eyes) but can be adjusted at 5mm increments. This means that the rig helps to create realistic and comfortable 3D Stereo VR. IN STOCK -
This protective frame is designed for using a Labpano PILOT ERA camera in situations where it may be vulnerable to damage. For example we have seen instances where cameras sitting on monopods in busy areas can get accidentally knocked over. This this is a precision engineered protective aluminium frame features four 'wings' which project out to protect the camera optics. They are designed to ensure that they do not impinge on the scene ensuring that the image quality is maintained and the camera is safe. -
This protective frame is designed for using a Labpano PILOT One (EE) camera in situations where it may be vulnerable to damage. For example we have seen instances where cameras sitting on monopods in busy areas can get accidentally knocked over. This this is a precision engineered protective aluminium frame features four 'wings' which project out to protect the camera optics. They are designed to ensure that they do not impinge on the scene ensuring that the image quality is maintained and the camera is safe. IN STOCK -
MAPIR Lens Protectors using an optically flat glass filter to protect the lens of Mapir Survey3 camera as well as fitting on any 22.5mm filter thread. Manufactured to resist the harshest environments the Lens Protector is a two part system consisting of a threaded clear glass abrasion resistant (AR) filter and a lens slip mount surround which fastens to the camera lens with 3 opposing set screws. MAPIR - MAPPING THE INVISIBLE IN STOCK -
MAPIR offer a comprehensive range of tilting and static drone mounts for payloads of up to four MAPIR 3 cameras. These include two lightweight static generic mounts allowing you to attach a Mapir Survey 3 camera on to any drone with the payload capacity. The mount includes the camera clips and features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilting mount allows you to easily attach up to two Mapir Survey3 cameras securely to any DJI Mavic 3 drone whilst keeping the original camera installed. It features a simple thumbscrew installation making it easy to remove and transport. The mount allows the camera to be tilted and positioned for optimal imaging. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to a DJI Mavic 2 Pro / Zoom / Enterprise drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilted mount enables users to attach a single Survey3 camera on to a DJI Mavic Pro drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to an Auto EVO drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
Four different mounts are available to attach MAPIR Survey3 cameras securely on to the DJI Phantom 4 Pro and Advanced drones. These comprise a combination of Single or Dual camera with Static or Tilting Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilting mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 3 Pro or Advanced drone whilst keeping the original camera installed. A mounting plate is included which replaces the DJI Phantom 3 top plate used by the drone. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu