Four different mounts are available to attach MAPIR Survey3 cameras securely on to the DJI Phantom 4 Pro and Advanced drones. These comprise a combination of Single or Dual camera with Static or Tilting Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera.
MAPIR – MAPPING THE INVISIBLE
€80.00 – €130.00
MAPIR offer a comprehensive range of tilting and static drone mounts for payloads of up to four MAPIR Survey3 cameras. These include a series of lightweight mounts which allow you to attach Mapir Survey 3 cameras securely on to a DJI Phantom 4 Pro or Advanced drone whilst keeping the original camera installed.
There are four mounts available – Single or Dual camera with Static or Tilting Mounts.
The Tilting Mounts have a black thumb screw on each side that allows you to adjust the camera’s tilt angle from 0 to 10 degrees to account for the forward flying tilt. Each notch is equal to 2.5 degrees of tilt. The advantage of these mounts is that you can tilt the angle of the camera to suit the drone’s forward flight speed. For every 5m/s you are flying tilt 5 degrees (so 10m/s = 10 degrees).
A Mapir Survey 3 camera clip is included for each camera. These mounts also feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. Each mount also features a simple four screw installation making it easy to remove and transport.
Optional lens protectors are recommended to protect the camera lenses from flying debris during take-off and landings.
|Material||Lightweight Plastic (MJF Nylon) Dyed green|
|Weight||Single Static Mount with clip 37g Dual Static Mount with clip 45g
Single Tilting Mount with clip 48g Dual Tilting Mount with clip TBA
|Dimensions||Single Static Mount TBA Dual Static Mount 118 x 94 x 33mm
Single Tilting Mount TBA Dual Tilting Mount TBA
- Ultra lightweight plastic construction
- Simple camera clip attachment
Lightweight mount for drone
Ideal for multispectral aerial mapping and survey applications
- Durable and lightweight plastic drone mounting plate
- Single or dual camera mounting plate
- Yellow (medium hardness) vibration dampening balls
- M2 screws (replacing existing DJI screws)
- Mapir Survey 3 camera clip for each camera
N.B. We are in no way liable for any damage caused to or by your drone. The mount has been thoroughly tested and when installed properly will not interfere with the normal operation of the drone.