-
Sale!
This lens has 3MP resolution with a F3.0 aperture and is suitable for camera sensors up to 1/2.5". It features a super compact design making it ideal for use on BackBone Ribcage modified cameras and will fit modified Hero 4 cameras installed in the underwater housing. IN STOCK -
The Labpano PILOT ERA is superior quality compact four lens 360 degree panoramic camera with 8K resolution for taking both video and photos. The Pilot Era camera features built in stitching with no requirement for a PC and is capable of stitching images live and streaming 4K video at 30fps. It includes a touch screen monitor for control or preview and large 7200 mAh battery allowing it to live-stream for up to 3 hours. Optional Protective Frame available. -
Set of 4 replacement medium hardness dampening balls for MAPIR camera mounts. These balls are standard on all Mapir static camera mounts that utilise 4 balls for vibration dampening. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Use this compact battery charger to charge up to two Survey3 batteries using any available USB port. Input power is via a Mini USB 5V / 2. Output is 2 x 4.2V / 0.75 Amps to the batteries. BATTERIES ARE NOT INCLUDED! MAPIR - MAPPING THE INVISIBLE IN STOCK -
Spare 5 volt, 1200 mAh, 4.44Wh battery for MAPIR Survey3 camera. A battery is supplied with the camera but it is advisable to have a spare! MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to an Auto EVO drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
MAPIR Lens Protectors using an optically flat glass filter to protect the lens of Mapir Survey3 camera as well as fitting on any 22.5mm filter thread. Manufactured to resist the harshest environments the Lens Protector is a two part system consisting of a threaded clear glass abrasion resistant (AR) filter and a lens slip mount surround which fastens to the camera lens with 3 opposing set screws. MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Mapir Survey3 Camera Clip allows you to retain one Survey3 camera on to Mapir static drone mount. Whenever you purchase a Mapir Static Mount from SeeSense this camera clip is included where required. However it is recommended to keep a spare in case you lose one! MAPIR - MAPPING THE INVISIBLEIN STOCK -
This standard GPS receiver uses a cheaper ublox UBX-G7020-KT chip inside to provide a quick GPS fix for the MAPIR Survey3 camera. Our Mapir camera systems are now supplied with the advanced GPS receiver for improved performance. When the camera has satellite lock it will beep 6 times. MAPIR - MAPPING THE INVISIBLEIN STOCK -
This Mapir Tilting mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 3 Pro or Advanced drone whilst keeping the original camera installed. A mounting plate is included which replaces the DJI Phantom 3 top plate used by the drone. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Single Static mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 1 or 2 drone whilst keeping the original camera installed. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to a DJI Mavic 2 Pro / Zoom / Enterprise drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilted mount enables users to attach a single Survey3 camera on to a DJI Mavic Pro drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Canon IK-4K is the world’s smallest Ultra HD 3-CMOS, 4K video remote head camera system providing 8MP 1600 TVL resolution and 3840 x 2160 output. This feature rich compact camera provides amazingly sharp detail and exceptional colour performance; it enhances many video applications from life sciences, professional film / broadcast, scientific imaging, through to defence. The IK-4K is ideal when 4K images are desired and space is limited providing absolutely the best quality images possible. Because of the specialist nature of this camera we suggest that you contact us for current pricing and for a quotation. -
The Theia Technologies MY125M 5 Megapixel 1.28mm C-mount Day/Night lens achieves 125° horizontal angle of view on a 1/3” sensor using patented Linear Optical Technology®. It achieves an ultra-wide field of view with ULTRA LOW DISTORTION (<3% barrel). It is suitable for camera sensors up to 1/2.5" and has a manual iris range from F1.8 -Closed. IN STOCK -
The Theia Technologies MY110M 3 Megapixel 1.67mm C-mount Day/Night lens achieves 110° horizontal angle of view on a 1/3” sensor using patented Linear Optical Technology®. It achieves an ultra-wide field of view with ULTRA LOW DISTORTION (<1% barrel). It is suitable for camera sensors up to 1/2.5" and has a manual iris range from F1.8 -Closed. IN STOCK -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 4.2mm focal length lens producing a 73° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing little barrel distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. AWAITING STOCK - PLEASE CONTACT US FOR AVAILABLITY -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 4.35mm focal length lens producing a 72° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing zero ‘fisheye’ distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. IN STOCK -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 3.8mm focal length lens producing a 83.5° horizontal angle of view on 1/2.3"sensors. It features a rectilinear IR corrected lens design producing almost zero barrel distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. IN STOCK -
This narrow angle S-mount (M12) 12MP lens has a focal length of 50mm. It features a 8.6° horizontal angle of view when fitted on 1/1.7" camera sensors. The lens works well with Back-Bone modified GoPro cameras also supplied by SeeSense plus other cameras featuring and M12 (S-mount). The lens is great for general shooting as well as specialist broadcast, film and industrial applications where a telephoto view is required. IN STOCK -
The Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) Male Tripod Mount is designed to attach to cameras, mounting plates, etc with a standard tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XS can fit Standard Swivellink components by attaching to the SLM-2-2XS coupler adapter. SeeSense also offer a SPECIAL version of this part with a 1/4-20 (1/4"UNC) female thread - SLM-5XSF.The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense modified Swivellink SLM-5XSF Small Ball 1/4"-20 (1/4"UNC) Female Tripod Mount features a 1/4-20 (1/4"UNC) FEMALE thread designed to attach to tripods, magnetic mounting plates, etc with a standard 1/4"UNC male tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XSF can fit Standard Series Swivellink components by attaching to the SLM-2-2XS coupler adapter. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3XST Small XS Series Metric Tee Link allows you to create two separate branches using a SLM-290XS Tee Knuckle connector attached to the centre ball. It incorporates a 10mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 10mm hole for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Mapir Survey3 Camera Frame Mount allows you to mount a Survey3 camera on to GoPro style 3 pronged mounting brackets and mounting systems. The frame mount consists of the green plastic frame only (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLE SPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Mapir Survey3 Camera hard case allows you to protect your camera in an all weather waterproof enclosure. The case is waterproof to a depth of 30 metres (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 3.65mm focal length lens producing a 82° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing zero ‘fisheye’ distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. OUT OF STOCK -
The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3TSL-15-250 provides the flexibility to adjust or fit a precise link length of between 15 and 25cm long. It incorporates a through hole for routing wires, cables, or small hoses. For example this is ideal if you wanted to be able to adjust the height of a monitor. The design also allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS90 small metric grey standard knuckle is designed as a tee connector working in conjunction with the XS series SLM-3XST Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Swivellink SLM-3T Standard Series Metric Tee Link The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The SLM-3T Tee link allows you to create two separate branches using a SLM-290 Tee Knuckle connector attached to the centre ball. It incorporates a 19mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 19mm x 38mm slot for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of LINKS to extend the reach of the mounting system between knuckle couplers. Where a Link piece is not long enough for needs adapting the SLM-3 Ball Adapter can be used instead. It is a standard 28.5mm ball with a 3/8"-19 BSPT thread so you can attach a pipe of any length! The ball includes machined spanner flats for tightening the pipe on the the adapter. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The Swivellink SLM-4 Button Mount enables you to fit a push button into your system. For example a machine might require the provision of a cycle start or emergency stop button. The SLM-4 is threaded M30 x 1.5 and has plenty of room for the cable connection inside. The robust design allows for a large range of motion while maintaining the cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The metric grey SLM-6 blank mounting plate is designed so you can drill and mount your equipment on to a plate. The SLM-6 includes drillings to accommodate the SLM-1 Standard Ball Base plus a slot to accommodate the exit of cables, wire or pipes that have passed through the centre of the Swivellink system. Four M5 x 14 socket cap setscrews are included for attaching the SLM-1. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-570XS-GP Small XS Series Metric GoPro Mount allows you to attach any device with a standard blade type GoPro mount. This makes Swivellink an ideal high quality mounting system for action cameras of all kind. As well as standard GoPro cameras and housings this mount enables you to directly attach the BackBone H8PRO modified Hero8 Black camera. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-6XS Small Metric XS Series Blank Mounting Plate is designed so you can drill and mount your equipment on to a plate. The SLM-6XS includes drillings to accommodate the SLM-1XS Small Ball Base in a choice of two positions. Two M5 x 12 socket cap setscrews are included for attaching the SLM-1XS. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-1 standard metric grey ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions or directly on to the mounting point of choice. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-1XS Small metric grey ball base features two 5mm holes spaced at 25mm for attaching to your preferred base material. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2 metric grey standard knuckle uses a double socket configuration to clamp to the ball of a standard base, standard link, or standard sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-290 Standard series metric knuckle is designed as a tee connector working in conjunction with the Standard series SLM-3T Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS small metric grey standard knuckle uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2-2XS is a cross-over metric knuckle adapter designed to connect Standard to XS Series Fittings. It uses a double socket configuration to clamp to the ball of a Standard or XS base, link, or small sensor mount depending on the connection end utilised. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Sale!
The Entaniya 220 degree lens is designed to suit a φ5.1mm Image Circle (1/2.3″ - 1/1.7″ sensors) and can be attached to M12 mount and also CS-mount cameras by using the dedicated CS-adapter included with the lens. The lens retains its "4K" resolution right to the edge of the image circle ensuring that sharp image quality is maintained and is the best quality compact 220 degree fisheye lens available today. It is perfect for use with most Back-Bone modified GoPro cameras. IN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
Sale!
The Entaniya 250 degree lens is designed to suit a φ5.1mm Image Circle (1/2.3″ - 1/1.7″ sensors) and can be attached to M12 mount and also CS-mount cameras by using the dedicated CS-adapter included with the lens. The lens retains its "4K" resolution right to the edge of the image circle ensuring that sharp image quality is maintained and is the best quality compact 250 degree fisheye lens available today. It is perfect for use with most Back-Bone modified GoPro cameras. AWAITING STOCK -
Sale!
The Entaniya 280 degree lens is designed to suit a φ5.1mm Image Circle (1/2.3″ - 1/1.7″ sensors) and can be attached to M12 mount and also CS-mount cameras by using the dedicated CS-adapter included with the lens. The lens retains its "4K" resolution right to the edge of the image circle ensuring that sharp image quality is maintained and is the best quality compact 280 degree fisheye lens available today. It is perfect for use with most Back-Bone modified GoPro cameras. IN STOCK -
Sale!
This Entaniya 3D Stereo VR Rig is specially designed for Back-Bone modified GoPro Hero 5, Hero 6 and Hero 7 cameras fitted with Entaniya 220 or 250 degree lenses. The system creates a lightweight VR180 Stereo camera system whilst retaining the ability to use the cameras for other purposes. The rig has a stable and accurate interocular distance of 65mm (the average distance between adult eyes) but can be adjusted at 5mm increments. This means that the rig helps to create realistic and comfortable 3D Stereo VR. IN STOCK -
The Back-Bone Ribcage Air modification kit is an affordable high quality DIY solution that enables users to fit a wide range of interchangeable high quality megapixel S (M12), CS or C-mount lenses on to a GoPro Hero4 Black or Silver camera. This makes the camera a more professional device suitable for applications from microscopy through to astronomy and everything in-between. Most popular lenses can either be attached directly or with optional adapters. Built on the GoPro Hero4 Black camera, BackBone's H4PRO takes advantage of the camera's industry leading features and quality, only now the choice of lens is up to you! Used by professionals and amateurs in all industries this camera really makes a GoPro Go-Professional.
CONTACT US IF YOU WOULD PREFER US TO MODIFY YOUR CAMERA FOR YOU. SPECIAL ORDER - 1 WEEK DELIVERY
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu