-
Bushman Panoramic Magic cable is designed for USB A power featuring feeding to a magnetic terminal with 3 in 1 choice of connectors. This allows you to attach 3 different ends to it – Micro USB-B, USB-C, and Apple Lighting. The standard 20cm cable was designed specifically for use with the Bushman Halo 360 Light to make it easier to connect and disconnect a range of cameras quickly and efficiently. However this and the 1m cable can be used with a wide range of other devices including your phone and other accessories where a quick release connector is useful and safer. IN STOCK -
Bushman Panoramic USB-A 90 degree to USB-C cable is designed to charge the Bushman Halo 360 Light or any other device requiring a USB-C power cable. This high quality braided cable measures 50cm long and incorporates metal bodied connectors. IN STOCK -
Voltaic Systems supply a series of extension cables with waterproof connectors which are primarily designed for connecting their solar panels to a battery. These standard cables are available in lengths of 30cm (1 foot), 1.25m (4 feet) or 3m (10 feet). The incorporate a 3.5 x 1.1mm male and female connector. These connectors also have a shroud which slides over the mating connector to make the cable totally waterproof. IN STOCK -
Voltaic Systems supply a splitter cable which is primarily designed for connecting two of their solar panels to a battery. The splitter cable also integrates directly with Voltaic extension cables. The cable features a 3.5 x 1.1mm male which splits to feed TWO 3.5 x 1.1mm female connectors. The female connectors also have a shroud which slides over the mating connector to make the cable totally waterproof. IN STOCK -
Voltaic Systems have a 5V Regulator USB cable that connects directly to any Voltaic Systems 6 Volt solar panel allowing you to safely charge any USB device, smartphone, or tablet directly from the sun. No battery pack is required, simply charge using your device's USB charging cable. Nice and simple - NO ELECTRONICS REQUIRED! IN STOCK -
The CamDo Underwater WiFi Extension Cables permit an action camera's 2.4 GHz WiFi and Bluetooth signal to be extended underwater. This means that users can perform any normal remote control function such as controlling the cameras or viewing a live preview using the camera's App. No direct connection is required to a camera, Apple or Android product however the modules at each end of the cable must be mounted in close proximity to surface and underwater devices to work. As the interface is wireless, the camera's underwater housing remains un-compromised and so the system can operate down to the specified operational depth of the housing. The cables are currently available from SeeSense in 7, 15 and 38 metre lengths. IN STOCK -
SeeSense USB-C to USB-C 70cm OTG cable system designed to connect a CamDo UpBlink intervalometer to GoPro HERO 10, 11 & 12 cameras. This new improved cable is labelled "UP" to show which end of the cable connects to the UpBlink ("UP" also means this way up). This cable is also supplied with CD-180319K UpBlinks for use with GoPro Hero 10, 11 & 12 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
This custom fully pinned USB-C to USB-C cable from CamDo Solutions is designed for use with the CamDo UpBlink intervalometer connecting to GoPro HERO 5, 6 7 and 8 cameras. The cable is 30cm long and allows a CamDo UpBlink intervalometer to interface with a GoPro camera. This cable is also supplied with CD-180310K UpBlink kits for use with GoPro Hero 5 - 8 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
This custom OTG cable is used for updating Blink firmware. It enables the Blink to act as the host, with the USB flash drive as a peripheral that can be accessed by Blink to update the controller from a file on the drive. The USB-A connection is used to power the Blink Intervalometer and flash drive.Contact SeeSense for Further InformationLIMITED REMAINING STOCK -
This custom Sony Multiport to USB-C cable from CamDo Solutions is designed for use with UpBlink to allow control of compatible Sony DSC-RX0 and DSC-RX0 II cameras. The cable is 15cm long and can be used as an upgrade purchase if you already own an UpBlink with cable for GoPro cameras. Simply update the CamDO UpBlink firmware to the latest version and now you can capture ling-term time-lapse with the superior Sony DSC-RX0 camera. Contact SeeSense for Further Information IN STOCK -
Replacement Canon EXC-3 Series Camera - Control Unit cables are high quality flexible cables available in 3, 6, 10 or 15 metre lengths. They should be used with Canon (formerly Toshiba) IK-4K, IK-HD5, IK-HD3 and IK-HR3 cameras. -
Mapir have a range of cables for the Advanced GPS Receiver including 20 or 50cm cables attaching on single or dual camera systems. These Advanced GPS cable are useful if either your cable becomes damaged, you wish to modify the GPS unit by attaching to two cameras, or you require a longer cable you can order the cables by themselves! MAPIR - MAPPING THE INVISIBLE IN STOCK -
Send a PWM (pulse width modulation) signal from a drone to perform various functions via the HDMI connector on a Mapir Survey3 camera. Cables are available in lengths of 20 or 50cm and for single or dual camera operation. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Use this cable to power a Survey3 camera through the USB port and view the live image from the camera from the First Person View (FPV). The cables are available in lengths of 20 or 50cm and for single or dual camera operation. MAPIR - MAPPING THE INVISIBLEIN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu