The Swivellink SLM-6XS Small Metric XS Series Blank Mounting Plate is designed so you can drill and mount your equipment on to a plate. The SLM-6XS includes drillings to accommodate the SLM-1XS Small Ball Base in a choice of two positions. Two M5 x 12 socket cap setscrews are included for attaching the SLM-1XS. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position.
CONTACT US regarding your requirement
IN STOCK
-
The Swivellink SLM-1XS Small metric grey ball base features two 5mm holes spaced at 25mm for attaching to your preferred base material. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2 metric grey standard knuckle uses a double socket configuration to clamp to the ball of a standard base, standard link, or standard sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2-2XS is a cross-over metric knuckle adapter designed to connect Standard to XS Series Fittings. It uses a double socket configuration to clamp to the ball of a Standard or XS base, link, or small sensor mount depending on the connection end utilised. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-290 Standard series metric knuckle is designed as a tee connector working in conjunction with the Standard series SLM-3T Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS small metric grey standard knuckle uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-1 standard metric grey ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions or directly on to the mounting point of choice. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
Sale!
This Entaniya 3D Stereo VR Rig is specially designed for Back-Bone modified GoPro Hero 5, Hero 6 and Hero 7 cameras fitted with Entaniya 220 or 250 degree lenses. The system creates a lightweight VR180 Stereo camera system whilst retaining the ability to use the cameras for other purposes. The rig has a stable and accurate interocular distance of 65mm (the average distance between adult eyes) but can be adjusted at 5mm increments. This means that the rig helps to create realistic and comfortable 3D Stereo VR. IN STOCK -
Sale!
The BackBone Sidearm is a snap in accessory providing four standard 1/4"-20 tripod mounting points on your camera. The Sidearm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidearm replaces the camera's side door. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
Built on the the superb Sony DSC-RX0 II and DSC-RXO action cameras, this Ribcage modification kit from Back-Bone takes advantage of the camera's industry leading features and quality, only now the choice of lens is up to you! This high grade aluminium modification kit allows users to FIT MANUAL 1" or 1.1" C-MOUNT OR MFT-MOUNT LENS LENSES ON TO THE CAMERA (N.B. The MFT mount is passive for manual iris lenses only). A passive MFT and C-Mount, standard 1/4-20 and 3/8-16 tripod mount, and removable IR-Cut filter are included to allow the camera to be utilised fro a broad range of different applications. N.B. If you are not confident about converting your camera SeeSense also offer a modification service. IN STOCK -
Sale!
The BackBone Sidekick is an accessory providing a standard 1/4"-20 tripod mounting point for your camera. The Sidekickm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidekick replaces the camera's side door. N.B. The camera is not waterproof while the Sidekick is fitted. IN STOCK -
The Back-Bone Ribcage Air modification kit is an affordable high quality DIY solution that enables users to fit a wide range of interchangeable high quality megapixel S (M12), CS or C-mount lenses on to a GoPro Hero4 Black or Silver camera. This makes the camera a more professional device suitable for applications from microscopy through to astronomy and everything in-between. Most popular lenses can either be attached directly or with optional adapters. Built on the GoPro Hero4 Black camera, BackBone's H4PRO takes advantage of the camera's industry leading features and quality, only now the choice of lens is up to you! Used by professionals and amateurs in all industries this camera really makes a GoPro Go-Professional.
CONTACT US IF YOU WOULD PREFER US TO MODIFY YOUR CAMERA FOR YOU. SPECIAL ORDER - 1 WEEK DELIVERY -
This tripod mount help make your GoPro Hero 8, 9, 10 or 11 Black camera into a SUPERHERO! The machined aluminium three point tripod mount is designed as a much stronger high quality replacement for the plastic folding GoPro mount. This Back-Bone tripod mount features a machined aluminium body with three standard 1/4"-20 standard tripod mounting points. It is very easy to exchange between mounts; all tools are included. It is also compatible with Back-Bone modified H8PRO, H9PRO, H10PRO & H11PRO cameras. MAKING THE GoPro HERO INTO A SUPERHERO! IN STOCK -
DISCONTINUED SUPERSEDED BY THE CAMDO UPBLINK The CamDo Blink is is a low power, WiFi enabled time-lapse intervalometer compatible with all GoPro Hero 4 and Hero 3+ Black cameras. This professional accessory helps unlock the full potential of GoPro cameras for long term time-lapse photography up to 4K resolution and includes a USB connector for external power considerably increasing the operation time of the camera. DISCONTINUED -
Sale!
The CamDo UpBlink is a low power, WiFi enabled time-lapse intervalometer which is compatible with the Sony DSC-RX0 series as well as the GoPro Hero camera range. It provides a flexible, reliable and accurate means of setting different time date and frequency settings for long-term time-lapse. We do not recommend this system for frequencies less than 5 minutes. This professional accessory helps unlock the full potential of GoPro and Sony DSC-RX0 cameras for long term time-lapse photography up to 5.3K resolution. Each system includes a dedicated cable connecting the intervalometer to the camera plus an USB connector for external power considerably increasing the operation time of the camera. * Also compatible with Back-Bone modified versions of these cameras. IN STOCK