The Swivellink SLM-CB Table Clamp can be used to mount any Swivellink system on to the edge of a table between 16mm and 35mm thick. A screw with a plastic knob is used to tighten the SLM-CB. Machined from aluminium it includes a variety of drilled holes for fastening Swivellink SLM-1 or SLM-1XS bases to the Table Clamp Base.
CONTACT US regarding your requirement
IN STOCK
-
The Swivellink SLM-1 standard metric grey ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions or directly on to the mounting point of choice. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-1XS Small metric grey ball base features two 5mm holes spaced at 25mm for attaching to your preferred base material. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2 metric grey standard knuckle uses a double socket configuration to clamp to the ball of a standard base, standard link, or standard sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2-2XS is a cross-over metric knuckle adapter designed to connect Standard to XS Series Fittings. It uses a double socket configuration to clamp to the ball of a Standard or XS base, link, or small sensor mount depending on the connection end utilised. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-290 Standard series metric knuckle is designed as a tee connector working in conjunction with the Standard series SLM-3T Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS small metric grey standard knuckle uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3TSL-15-250 provides the flexibility to adjust or fit a precise link length of between 15 and 25cm long. It incorporates a through hole for routing wires, cables, or small hoses. For example this is ideal if you wanted to be able to adjust the height of a monitor. The design also allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS90 small metric grey standard knuckle is designed as a tee connector working in conjunction with the XS series SLM-3XST Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Swivellink SLM-3T Standard Series Metric Tee Link The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The SLM-3T Tee link allows you to create two separate branches using a SLM-290 Tee Knuckle connector attached to the centre ball. It incorporates a 19mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 19mm x 38mm slot for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of LINKS to extend the reach of the mounting system between knuckle couplers. Where a Link piece is not long enough for needs adapting the SLM-3 Ball Adapter can be used instead. It is a standard 28.5mm ball with a 3/8"-19 BSPT thread so you can attach a pipe of any length! The ball includes machined spanner flats for tightening the pipe on the the adapter. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The Swivellink SLM-4 Button Mount enables you to fit a push button into your system. For example a machine might require the provision of a cycle start or emergency stop button. The SLM-4 is threaded M30 x 1.5 and has plenty of room for the cable connection inside. The robust design allows for a large range of motion while maintaining the cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The metric grey SLM-6 blank mounting plate is designed so you can drill and mount your equipment on to a plate. The SLM-6 includes drillings to accommodate the SLM-1 Standard Ball Base plus a slot to accommodate the exit of cables, wire or pipes that have passed through the centre of the Swivellink system. Four M5 x 14 socket cap setscrews are included for attaching the SLM-1. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-570XS-GP Small XS Series Metric GoPro Mount allows you to attach any device with a standard blade type GoPro mount. This makes Swivellink an ideal high quality mounting system for action cameras of all kind. As well as standard GoPro cameras and housings this mount enables you to directly attach the BackBone H8PRO modified Hero8 Black camera. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-6XS Small Metric XS Series Blank Mounting Plate is designed so you can drill and mount your equipment on to a plate. The SLM-6XS includes drillings to accommodate the SLM-1XS Small Ball Base in a choice of two positions. Two M5 x 12 socket cap setscrews are included for attaching the SLM-1XS. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) Male Tripod Mount is designed to attach to cameras, mounting plates, etc with a standard tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XS can fit Standard Swivellink components by attaching to the SLM-2-2XS coupler adapter. SeeSense also offer a SPECIAL version of this part with a 1/4-20 (1/4"UNC) female thread - SLM-5XSF.The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense modified Swivellink SLM-5XSF Small Ball 1/4"-20 (1/4"UNC) Female Tripod Mount features a 1/4-20 (1/4"UNC) FEMALE thread designed to attach to tripods, magnetic mounting plates, etc with a standard 1/4"UNC male tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XSF can fit Standard Series Swivellink components by attaching to the SLM-2-2XS coupler adapter. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3XST Small XS Series Metric Tee Link allows you to create two separate branches using a SLM-290XS Tee Knuckle connector attached to the centre ball. It incorporates a 10mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 10mm hole for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to an Auto EVO drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. They incorporate a 19mm diameter through hole for routing wires, cables, or small hoses. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. They incorporate a 10mm diameter through hole for routing wires, cables, or small hoses. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Small XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The metric grey SLM-5 blank mounting plate is designed to accommodate a range of different equipment on to a plate. This includes drillings to accommodate the SLM-1 and SLM-1XS Ball Base plus a slot to accommodate the exit of cables, wire or pipes that have passed through the centre of the Swivellink system. Four M5 x 14 socket cap setscrews are included for attaching the SLM-1 and SLM-1XS. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard assembly comprises 2 x mounting bases, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 19mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small assembly comprises 2 x mounting bases, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 10mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small camera assembly comprises mounting base, 1/4"-20 camera mount, knuckles and a link arm of the length you require. Further links and knuckles can be added to extend the system. The assembly features a 10mm diameter through hole for routing wires, cables, or small hoses regardless of the large range of motion in the system. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense Swivellink magnetic base comprises a modified Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) male tripod mount to ball adapter modified to FEMALE thread (SLM-5XSF) attached to an 88mm diameter Bushman Panoramic Popeye magnetic base. The 18.5mm ball can attach to Swivellink XS knuckles. In the case of heavier equipment the SLM-5XSFPOP can fit Standard Series Swivellink components by attaching to the SLM-2-2XS adapter knuckle connector. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Set of 4 replacement medium hardness dampening balls for MAPIR camera mounts. These balls are standard on all Mapir static camera mounts that utilise 4 balls for vibration dampening. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
The Bushman Camera Holder features a 1/4"-12 UNC male tripod mounting thread that can be screwed directly into the tripod mount of a small camera allowing you to attach it to a strap or small carabiner clip. Keep your action camera, or VR camera safe by wearing it around your neck. The Camera Holder features a rubber pad to help hold the camera tight and protect it from being scratched by the camera holder. IN STOCK -
Sale!
The BackBone Sidekick is an accessory providing a standard 1/4"-20 tripod mounting point for your camera. The Sidekickm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidekick replaces the camera's side door. N.B. The camera is not waterproof while the Sidekick is fitted. IN STOCK -
The Mapir Survey3 Camera Clip allows you to retain one Survey3 camera on to Mapir static drone mount. Whenever you purchase a Mapir Static Mount from SeeSense this camera clip is included where required. However it is recommended to keep a spare in case you lose one! MAPIR - MAPPING THE INVISIBLEIN STOCK -
The Bushman Panoramic 1/4″ Spacer is ideal when you need to raise a camera or accessory by around 50mm. The 1/4" Spacer was designed for use with Bushman Panoramic Monopods, Corepoles, tripod, or magnetic bases. It is equally at home integrating with any mounting system that utilises 1/4"UNC thread such a Swivellink equipment available from SeeSense. Ideal for use with VR cameras, miniature cameras, compact lighting systems, etc. IN STOCK -
The Bushman Ground Spike is a simple device that screws into the ground to provide a secure base for attaching cameras, monopods, poles, mounting devices, etc. IN STOCK -
This tripod mount help make your GoPro Hero 8, 9, 10 or 11 Black camera into a SUPERHERO! The machined aluminium three point tripod mount is designed as a much stronger high quality replacement for the plastic folding GoPro mount. This Back-Bone tripod mount features a machined aluminium body with three standard 1/4"-20 standard tripod mounting points. It is very easy to exchange between mounts; all tools are included. It is also compatible with Back-Bone modified H8PRO, H9PRO, H10PRO & H11PRO cameras. MAKING THE GoPro HERO INTO A SUPERHERO! IN STOCK -
The Bushman Panoramic Compass Level is a new and innovative product designed to assist and improve VR photography. Firstly there is a compass; this allows you to obtain a reference point when taking multiple images in a VR tour. The second feature is a bubble level which can be used in instances when you require your equipment to be set up in a stable and level position. This is the perfect accessory to own if you are creating virtual tours. IN STOCK -
The Bushman Monkey Clamp is a simple device that allows you to attach cameras and other equipment securely. The jaws can open to a maximum width of 40mm and have a rubber cover to protect and grip on the surfaces the clamp is attached to. The bracket features 1/4 and 3/8"UNC female standard tripod mounts. IN STOCK -
Sale!
This low profile mount is used to attach M12 lenses which will not focus using the standard Back-Bone M12 to CS-mount adapter. It is compatible with all Back-Bone PRO (H8-5) modified GoPro cameras. The Low Profile Mount can be mounted flush or reversed to add more thread to the front of the camera. IN STOCK -
Sale!
The BackBone Sidearm is a snap in accessory providing four standard 1/4"-20 tripod mounting points on your camera. The Sidearm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidearm replaces the camera's side door. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
The 3Dio Grip Handle is perfect for the hand-held operation of any 3Dio microphone. It is a convenient alternative mounting your 3Dio microphone on to tripod or mic stand but can also be sued with our Back-Bone cameras or Bushman monopod. It features a rubber handle, 1/4" Male thread for attaching to the microphone and 1/4" Female tripod thread to fit to on to a tripod, monopod or mic stand along with an optional circular split cotter "keyring"attachment. The 3Dio grip handle is perfect for field recording and situations where a microphone will be hand held. IN STOCK -
Bushman Panoramic offer a choice of 300 or 400g counterweight with 1/4"Male to Female adapters. They are intended to increase the stability of a Monopod and camera system by lowering its centre of gravity thus making it much less likely to fall over. Simply screw the counterweight directly on to a small tripod using the 1/4"UNC Female connection on the bottom of the counterweight, then attach the Monopod to the 1/4"UNC Male thread on top. Bushman Monopods include a counterweight; add more for increased stability. IN STOCK -
Bushman Panoramic Popeye Magnetic Bases are composed of a series of powerful rare earth magnets sealed in black rubber to protect metal surfaces from scratching. In the centre is a 1/4" UNC male standard tripod mount thread upon which many different mounting solutions can be attached. They are available with a pull force of 45kg (Popeye) and 12kg (Baby Popeye). IN STOCK -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
The Bushman Panoramic Bender is an arm with double ball head with 1/4" threads designed specifically to allow unlimited adjustment in any direction to the angle of a small VR camera mounted on to a Bushman Panoramic Monopod or Popeye. Each of the two ball heads features an O-ring to prevent any movement from vibration, and can rotate in an arc of up to 260 degree. Both ball heads are locked by a single clamp. IN STOCK -
The 3DIO Hardware Mounting Bracket for 3DIO FS, FS-XLR and FS-PRO II series microphones is designed for mounting a small HD sports camera and an external audio recorder. For example it allows you to mount a GoPro type camera in the appropriate relative location to the ears on any of the FS Series Microphones. This bracket is ideal for accurate point-of-view (POV) experiences. IN STOCK -
Sale!
This Entaniya 3D Stereo VR Rig is specially designed for Back-Bone modified GoPro Hero 5, Hero 6 and Hero 7 cameras fitted with Entaniya 220 or 250 degree lenses. The system creates a lightweight VR180 Stereo camera system whilst retaining the ability to use the cameras for other purposes. The rig has a stable and accurate interocular distance of 65mm (the average distance between adult eyes) but can be adjusted at 5mm increments. This means that the rig helps to create realistic and comfortable 3D Stereo VR. IN STOCK -
The Mapir Survey3 Camera Frame Mount allows you to mount a Survey3 camera on to GoPro style 3 pronged mounting brackets and mounting systems. The frame mount consists of the green plastic frame only (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLE SPECIAL ORDER - CONTACT US FOR AVAILABILITY