IN STOCK
-
This standard GPS receiver uses a cheaper ublox UBX-G7020-KT chip inside to provide a quick GPS fix for the MAPIR Survey3 camera. Our Mapir camera systems are now supplied with the advanced GPS receiver for improved performance. When the camera has satellite lock it will beep 6 times. MAPIR - MAPPING THE INVISIBLE -
The 3Dio Grip Handle is perfect for the hand-held operation of any 3Dio microphone. It is a convenient alternative mounting your 3Dio microphone on to tripod or mic stand but can also be sued with our Back-Bone cameras or Bushman monopod. It features a rubber handle, 1/4" Male thread for attaching to the microphone and 1/4" Female tripod thread to fit to on to a tripod, monopod or mic stand along with an optional circular split cotter "keyring"attachment. The 3Dio grip handle is perfect for field recording and situations where a microphone will be hand held. IN STOCK -
Sale!
This custom fully pinned USB-C to USB-C cable from CamDo Solutions is designed for use with the CamDo UpBlink intervalometer connecting to GoPro HERO 5, 6 7 and 8 cameras. The cable is 30cm long and allows a CamDo UpBlink intervalometer to interface with a GoPro camera. This cable is also supplied with CD-180310K UpBlink kits for use with GoPro Hero 5 - 8 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
MAPIR Lens Protectors using an optically flat glass filter to protect the lens of Mapir Survey3 camera as well as fitting on any 22.5mm filter thread. Manufactured to resist the harshest environments the Lens Protector is a two part system consisting of a threaded clear glass abrasion resistant (AR) filter and a lens slip mount surround which fastens to the camera lens with 3 opposing set screws. MAPIR - MAPPING THE INVISIBLE IN STOCK -
Use this compact battery charger to charge up to two Survey3 batteries using any available USB port. Input power is via a Mini USB 5V / 2. Output is 2 x 4.2V / 0.75 Amps to the batteries. BATTERIES ARE NOT INCLUDED! MAPIR - MAPPING THE INVISIBLE IN STOCK -
Bushman Panoramic offer a choice of 300 or 400g counterweight with 1/4"Male to Female adapters. They are intended to increase the stability of a Monopod and camera system by lowering its centre of gravity thus making it much less likely to fall over. Simply screw the counterweight directly on to a small tripod using the 1/4"UNC Female connection on the bottom of the counterweight, then attach the Monopod to the 1/4"UNC Male thread on top. Bushman Monopods include a counterweight; add more for increased stability. IN STOCK -
Bushman Panoramic Popeye Magnetic Bases are composed of a series of powerful rare earth magnets sealed in black rubber to protect metal surfaces from scratching. In the centre is a 1/4" UNC male standard tripod mount thread upon which many different mounting solutions can be attached. They are available with a pull force of 45kg (Popeye) and 12kg (Baby Popeye). IN STOCK -
This custom Sony Multiport to USB-C cable from CamDo Solutions is designed for use with UpBlink to allow control of compatible Sony DSC-RX0 and DSC-RX0 II cameras. The cable is 15cm long and can be used as an upgrade purchase if you already own an UpBlink with cable for GoPro cameras. Simply update the CamDO UpBlink firmware to the latest version and now you can capture ling-term time-lapse with the superior Sony DSC-RX0 camera. Contact SeeSense for Further Information IN STOCK -
SeeSense USB-C to USB-C 70cm OTG cable system designed to connect a CamDo UpBlink intervalometer to GoPro HERO 10, 11 & 12 cameras. This new improved cable is labelled "UP" to show which end of the cable connects to the UpBlink ("UP" also means this way up). This cable is also supplied with CD-180319K UpBlinks for use with GoPro Hero 10, 11 & 12 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
The Bushman Panoramic Bender is an arm with double ball head with 1/4" threads designed specifically to allow unlimited adjustment in any direction to the angle of a small VR camera mounted on to a Bushman Panoramic Monopod or Popeye. Each of the two ball heads features an O-ring to prevent any movement from vibration, and can rotate in an arc of up to 260 degree. Both ball heads are locked by a single clamp. IN STOCK -
The 3DIO Hardware Mounting Bracket for 3DIO FS, FS-XLR and FS-PRO II series microphones is designed for mounting a small HD sports camera and an external audio recorder. For example it allows you to mount a GoPro type camera in the appropriate relative location to the ears on any of the FS Series Microphones. This bracket is ideal for accurate point-of-view (POV) experiences. IN STOCK -
The Advanced GPS/GNSS receiver for the MAPIR Survey3 camera is included as standard with all MAPIR Survey3 cameras supplied by SeeSense. The Advanced GPS receiver provides increased image geolocation accuracy compared to the Standard GPS receiver thanks to the newer U-blox NEO-M8 module. If you require longer and / or dual cables please look at the USB cables HERE. MAPIR - MAPPING THE INVISIBLEIN STOCK -
The V25 / 23Watt-Hour Lithium Polymer battery features two 5V USB output ports, both rated at 2A with a combined total of 3A available. The USB Battery Pack has the critical "Always On" operating mode making it ideal for long-term time-lapse using the CamDo Solutions UpBlink intervalometer or for extending the battery life action cameras including Back-Bone modified GoPro.
The V25 features pass through charging and is optimised for solar charging using Voltaic and other equipment. WE ARE SORRY BUT WE DO NOT SHIP THESE BATTERIES OUTSIDE EUROPE IN STOCK
-
Sale!
This Entaniya 3D Stereo VR Rig is specially designed for Back-Bone modified GoPro Hero 5, Hero 6 and Hero 7 cameras fitted with Entaniya 220 or 250 degree lenses. The system creates a lightweight VR180 Stereo camera system whilst retaining the ability to use the cameras for other purposes. The rig has a stable and accurate interocular distance of 65mm (the average distance between adult eyes) but can be adjusted at 5mm increments. This means that the rig helps to create realistic and comfortable 3D Stereo VR. IN STOCK -
The Mapir Survey3 Camera Frame Mount allows you to mount a Survey3 camera on to GoPro style 3 pronged mounting brackets and mounting systems. The frame mount consists of the green plastic frame only (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLE SPECIAL ORDER - CONTACT US FOR AVAILABILITY