-
3Dio Professional Wind Muffs offer the perfect wind protection for the 3DIO FS, FS XLR and FS Pro II Binaural Microphone range even in the strongest conditions. They feature an elastic opening that you wrap around each ear disk like a 'shower cap' making them incredibly quick to install and very secure once in place. They are sold in pairs. IN STOCK -
Set of 4 replacement medium hardness dampening balls for MAPIR camera mounts. These balls are standard on all Mapir static camera mounts that utilise 4 balls for vibration dampening. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Sale!
The BackBone Sidekick is an accessory providing a standard 1/4"-20 tripod mounting point for your camera. The Sidekickm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidekick replaces the camera's side door. N.B. The camera is not waterproof while the Sidekick is fitted. IN STOCK -
Sale!
The BackBone Sidearm is a snap in accessory providing four standard 1/4"-20 tripod mounting points on your camera. The Sidearm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidearm replaces the camera's side door. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
This tripod mount help make your GoPro Hero 8, 9, 10 or 11 Black camera into a SUPERHERO! The machined aluminium three point tripod mount is designed as a much stronger high quality replacement for the plastic folding GoPro mount. This Back-Bone tripod mount features a machined aluminium body with three standard 1/4"-20 standard tripod mounting points. It is very easy to exchange between mounts; all tools are included. It is also compatible with Back-Bone modified H8PRO, H9PRO, H10PRO & H11PRO cameras. MAKING THE GoPro HERO INTO A SUPERHERO! IN STOCK -
The Bushman Panoramic 1/4″ Spacer is ideal when you need to raise a camera or accessory by around 50mm. The 1/4" Spacer was designed for use with Bushman Panoramic Monopods, Corepoles, tripod, or magnetic bases. It is equally at home integrating with any mounting system that utilises 1/4"UNC thread such a Swivellink equipment available from SeeSense. Ideal for use with VR cameras, miniature cameras, compact lighting systems, etc. IN STOCK -
The CamDo SolarX is a 9 Watt solar panel system complete with brackets designed to integrate directly with CamDo's Dry X (CD-180318) enclosure. The 9 watt solar panel can trickle charge CamDo V50 47Wh and V75 71Wh batteries which provides over 10X / 15X the life compared to a GoPro battery. Two SolarX panels can be attached to the DryX enclosure. The complete system is ideal for time-lapse us for general photography, wildlife photography or surveillance. IN STOCK -
Sale!
This Entaniya 3D Stereo VR Rig is specially designed for Back-Bone modified GoPro Hero 5, Hero 6 and Hero 7 cameras fitted with Entaniya 220 or 250 degree lenses. The system creates a lightweight VR180 Stereo camera system whilst retaining the ability to use the cameras for other purposes. The rig has a stable and accurate interocular distance of 65mm (the average distance between adult eyes) but can be adjusted at 5mm increments. This means that the rig helps to create realistic and comfortable 3D Stereo VR. IN STOCK -
The Mapir Survey3 Camera Clip allows you to retain one Survey3 camera on to Mapir static drone mount. Whenever you purchase a Mapir Static Mount from SeeSense this camera clip is included where required. However it is recommended to keep a spare in case you lose one! MAPIR - MAPPING THE INVISIBLEIN STOCK -
This protective frame is designed for using a Labpano PILOT One (EE) camera in situations where it may be vulnerable to damage. For example we have seen instances where cameras sitting on monopods in busy areas can get accidentally knocked over. This this is a precision engineered protective aluminium frame features four 'wings' which project out to protect the camera optics. They are designed to ensure that they do not impinge on the scene ensuring that the image quality is maintained and the camera is safe. IN STOCK -
This protective frame is designed for using a Labpano PILOT ERA camera in situations where it may be vulnerable to damage. For example we have seen instances where cameras sitting on monopods in busy areas can get accidentally knocked over. This this is a precision engineered protective aluminium frame features four 'wings' which project out to protect the camera optics. They are designed to ensure that they do not impinge on the scene ensuring that the image quality is maintained and the camera is safe. -
The NVR5832 is a new generation of professional standalone Network Video Recorder that can support up to 32 Ultra HD 4K IP cameras and eight 12TB hard drives and two eSATA connectors to expand a further 32TB. LILIN IPScan and WS-Discovery feature software allows users to quickly connect the camera to the recorder making entire system easier to use. The LILIN NVR5832 is mainly used in the high-end megapixel surveillance market, such as medium and large enterprises and factories, restaurants, retail chains and intelligent buildings. LILIN products are manufactured in Taiwan and are NDAA compliant. PROJECT & RESELLER pricing is available, please CONTACT SeeSense for further details. -
The NVR5416 is a new generation of professional standalone Network Video Recorder that can support up to 16 Ultra HD 4K IP cameras and four 12TB hard drives. LILIN IPScan and WS-Discovery feature software allows users to quickly connect the camera to the recorder making entire system easier to use. The LILIN NVR5416 is mainly used in the high-end megapixel surveillance market, such as medium and large enterprises and factories, restaurants, retail chains and intelligent buildings. LILIN products are manufactured in Taiwan and are NDAA compliant. PROJECT & RESELLER pricing is available, please CONTACT SeeSense for further details. -
The LILIN EVR-3116E is a new generation of cost effective standalone PoE Network Video Recorder with hassle-free and simple installation. It is capable of powering up to 16 IP cameras and supports up to 16 channels recording to one single hard drives with up to 10TB capacity. When using PoE no IP address configuration is required making the system remarkably simple easy to set up. Alternatively the LILIN IPScan and WS-Discovery feature software also allows users to connect the camera to the recorder quickly. The LILIN EVR-3116E provides users with a simple, affordable yet professional solution for megapixel surveillance in the mainstream markets such as SMBs, retail, hospitality, and intelligent buildings. LILIN products are manufactured in Taiwan and are NDAA compliant. PROJECT & RESELLER pricing is available, please CONTACT SeeSense for further details. IN STOCK -
The LILIN EVR-3108E is a new generation of cost effective standalone PoE Network Video Recorder with hassle-free and simple installation. It is capable of powering up to 8 IP cameras and supports up to 8 channels recording to one single hard drives with up to 10TB capacity. When using PoE no IP address configuration is required making the system remarkably simple to set up. Alternatively the LILIN IPScan and WS-Discovery feature software also allows users to connect the camera to the recorder quickly. The LILIN EVR-3108E provides users with a simple, affordable yet professional solution for megapixel surveillance in the mainstream markets such as SMBs, retail, hospitality, and intelligent buildings. LILIN products are manufactured in Taiwan and are NDAA compliant. PROJECT & RESELLER pricing is available, please CONTACT SeeSense for further details. IN STOCK -
The LILIN EVR-3104E is a new generation of cost effective standalone PoE Network Video Recorder with hassle-free and simple installation. It is capable of powering up to 4 IP cameras and supports up to 4 channels recording to one single hard drives with up to 10TB capacity. When using PoE no IP address configuration is required making the system remarkably simple easy to set up. Alternatively the LILIN IPScan and WS-Discovery feature software also allows users to connect the camera to the recorder quickly. The LILIN EVR-3104E provides users with a simple, affordable yet professional solution for megapixel surveillance in the mainstream markets such as SMBs, retail, hospitality, and intelligent buildings. LILIN products are manufactured in Taiwan and are NDAA compliant. PROJECT & RESELLER pricing is available, please CONTACT SeeSense for further details. IN STOCK -
The Swivellink SLM-6XS Small Metric XS Series Blank Mounting Plate is designed so you can drill and mount your equipment on to a plate. The SLM-6XS includes drillings to accommodate the SLM-1XS Small Ball Base in a choice of two positions. Two M5 x 12 socket cap setscrews are included for attaching the SLM-1XS. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The metric grey SLM-6 blank mounting plate is designed so you can drill and mount your equipment on to a plate. The SLM-6 includes drillings to accommodate the SLM-1 Standard Ball Base plus a slot to accommodate the exit of cables, wire or pipes that have passed through the centre of the Swivellink system. Four M5 x 14 socket cap setscrews are included for attaching the SLM-1. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The metric grey SLM-5 blank mounting plate is designed to accommodate a range of different equipment on to a plate. This includes drillings to accommodate the SLM-1 and SLM-1XS Ball Base plus a slot to accommodate the exit of cables, wire or pipes that have passed through the centre of the Swivellink system. Four M5 x 14 socket cap setscrews are included for attaching the SLM-1 and SLM-1XS. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense Swivellink magnetic base comprises a modified Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) male tripod mount to ball adapter modified to FEMALE thread (SLM-5XSF) attached to an 88mm diameter Bushman Panoramic Popeye magnetic base. The 18.5mm ball can attach to Swivellink XS knuckles. In the case of heavier equipment the SLM-5XSFPOP can fit Standard Series Swivellink components by attaching to the SLM-2-2XS adapter knuckle connector. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-570XS-GP Small XS Series Metric GoPro Mount allows you to attach any device with a standard blade type GoPro mount. This makes Swivellink an ideal high quality mounting system for action cameras of all kind. As well as standard GoPro cameras and housings this mount enables you to directly attach the BackBone H8PRO modified Hero8 Black camera. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-4 Button Mount enables you to fit a push button into your system. For example a machine might require the provision of a cycle start or emergency stop button. The SLM-4 is threaded M30 x 1.5 and has plenty of room for the cable connection inside. The robust design allows for a large range of motion while maintaining the cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
This Mapir Single Static mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 1 or 2 drone whilst keeping the original camera installed. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Mapir Survey3 Camera Frame Mount allows you to mount a Survey3 camera on to GoPro style 3 pronged mounting brackets and mounting systems. The frame mount consists of the green plastic frame only (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLE SPECIAL ORDER - CONTACT US FOR AVAILABILITY -
Four different mounts are available to attach MAPIR Survey3 cameras securely on to the DJI Phantom 4 Pro and Advanced drones. These comprise a combination of Single or Dual camera with Static or Tilting Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilting mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 3 Pro or Advanced drone whilst keeping the original camera installed. A mounting plate is included which replaces the DJI Phantom 3 top plate used by the drone. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Tilted mount enables users to attach a single Survey3 camera on to a DJI Mavic Pro drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the DJI Inspire 2 drone with Tilting Single or Dual camera Mounts. Each mount comes with camera clips and features a simple two screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLEIN STOCK -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the DJI Inspire 1 drone with Tilting Single or Dual camera Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLEIN STOCK -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to an Auto EVO drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the 3DR X8 drone with Static Single or Dual camera Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - PLEASE CONTACT US FOR AVAILABILITY -
There are seven mounts available to attach MAPIR Survey3 cameras securely on to 3DR Solo drones with a combination of Single, Dual or Quad camera with Static or Tilting Mount options. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the 3DR Iris+ drone with Static Single or Dual camera Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - PLEASE CONTACT US FOR AVAILABILITY -
This Mapir Tilting mount allows you to easily attach up to two Mapir Survey3 cameras securely to any DJI Mavic 3 drone whilst keeping the original camera installed. It features a simple thumbscrew installation making it easy to remove and transport. The mount allows the camera to be tilted and positioned for optimal imaging. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to a DJI Mavic 2 Pro / Zoom / Enterprise drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLE IN STOCK -
MAPIR offer a comprehensive range of tilting and static drone mounts for payloads of up to four MAPIR 3 cameras. These include two lightweight static generic mounts allowing you to attach a Mapir Survey 3 camera on to any drone with the payload capacity. The mount includes the camera clips and features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Bushman Panoramic Quick Release mount is an innovative and unique new product specifically designed for use with 360° VR cameras but can be used with other devices requiring fast removal. Permanently attach the top section of the mount to the camera, and the bottom section to a Bushman Panoramic Monopod or your other preferred mounting solution. When you want to deploy the camera simply push it onto the Quick Release base which will hold the camera firmly in place as well as allowing you to rotate it to optimise stitch line positioning. After use the camera can be quickly removed by pushing down the red Quick Release ring. This is the perfect for VR content producers and complements Bushman's V3 PRO monopod. Further details below. IN STOCK -
Sale!
This low profile mount is used to attach M12 lenses which will not focus using the standard Back-Bone M12 to CS-mount adapter. It is compatible with all Back-Bone PRO (H8-5) modified GoPro cameras. The Low Profile Mount can be mounted flush or reversed to add more thread to the front of the camera. IN STOCK -
The ARGUS wall bracket allows you to attach any ARGUS housing or solar panel on to a wall. last fence post or other surfaces. It can also be used with 52mm U-bolts to fit around scaffolding poles, aerials or masts. The bracket allows you to tilt or pan the housing to the desired position before being locked into place with a clamping nut and bolt arrangement. The ARGUS range of housings and mounts are perfect for a wide range of applications and already sees regular use for long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. -
The ARGUS scaffolding pole pivot mounting bracket is a unique product designed to fit on the top of a 48mm diameter scaffolding pole. It also features a bracket which can be tilted so you can pan and tilt the housing to the desired position before being locked into place with a clamping nut and bolt arrangement. The ARGUS range of housings and mounts are perfect for a wide range of applications and already sees regular use for long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. -
The ARGUS mast mounting bracket allows you to attach any ARGUS housing or solar panel on to a lamp post, mast, aerial post, etc by securing it with band camps (Jubilee clips). The bracket allows you to tilt the housing to the desired position before being locked into place with a clamping nut and bolt arrangement. Pan movement is also achievable by loosening the band clamp. Please Note - band clamp is not included The ARGUS range of housings and mounts are perfect for a wide range of applications and already sees regular use for long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. -
The Swivellink SLM-1 standard metric grey ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions or directly on to the mounting point of choice. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-1XS Small metric grey ball base features two 5mm holes spaced at 25mm for attaching to your preferred base material. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
Bushman Panoramic Little Feet comprises three 38cm long telescopic aluminium legs designed to attach to the Bushman Corelite and Corepole and enable them to stand freely. Little Feet can be screwed into bottom of the poles at two angles to achieve 'flat feet' or 'raised feet' to suit the terrain. Alternatively Little Feet can be screwed together to create a short 65cm Monopole with 3/8" UNC threads at each end. SPECIAL ORDER -
The Bushman Panoramic Corepole is as a 190cm long carbon fibre telescopic pole designed for larger VR cameras whilst hiding unsightly cables inside. The ideal is that unsightly cables ruin image quality in VR360 and VR180 videos and images. This solution keeps them hidden whilst providing a strong and stable support for the camera. Bushman Corepole BUNDLE also available. SPECIAL ORDER -
Sale!
The Bushman Panoramic Corelite is as a 90cm long carbon fibre telescopic pole designed for larger VR cameras whilst hiding unsightly cables inside. The ideal is that unsightly cables ruin image quality in VR360 and VR180 videos and images. This solution keeps them hidden whilst providing a strong and stable support for the camera. SPECIAL ORDER -
Bushman Panoramic's latest and most popular lightweight 1.54 metre telescopic monopole is the perfect solution for mounting small 360° cameras extending to 154cm making it perfect for stable 360VR videos. The Bushman V2 Monopod has a host of new features including five black anodised aluminium sections which telescope closed to a length of just 39cm making easier to transport and still support a vertical weight of up to 3 KG. Choose between the Bushman V2 Monopod STANDARD or BUNDLE options. IN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu