-
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 4.2mm focal length lens producing a 73° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing little barrel distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. AWAITING STOCK - PLEASE CONTACT US FOR AVAILABLITY -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 3.65mm focal length lens producing a 82° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing zero ‘fisheye’ distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. OUT OF STOCK -
3Dio Professional Wind Muffs offer the perfect wind protection for the 3DIO FS, FS XLR and FS Pro II Binaural Microphone range even in the strongest conditions. They feature an elastic opening that you wrap around each ear disk like a 'shower cap' making them incredibly quick to install and very secure once in place. They are sold in pairs. IN STOCK -
This Mapir Tilted mount enables users to attach a single Survey3 camera on to a DJI Mavic Pro drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to a DJI Mavic 2 Pro / Zoom / Enterprise drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Single Static mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 1 or 2 drone whilst keeping the original camera installed. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The ARGUS mast mounting bracket allows you to attach any ARGUS housing or solar panel on to a lamp post, mast, aerial post, etc by securing it with band camps (Jubilee clips). The bracket allows you to tilt the housing to the desired position before being locked into place with a clamping nut and bolt arrangement. Pan movement is also achievable by loosening the band clamp. Please Note - band clamp is not included The ARGUS range of housings and mounts are perfect for a wide range of applications and already sees regular use for long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. -
The Bushman Panoramic Quick Release mount is an innovative and unique new product specifically designed for use with 360° VR cameras but can be used with other devices requiring fast removal. Permanently attach the top section of the mount to the camera, and the bottom section to a Bushman Panoramic Monopod or your other preferred mounting solution. When you want to deploy the camera simply push it onto the Quick Release base which will hold the camera firmly in place as well as allowing you to rotate it to optimise stitch line positioning. After use the camera can be quickly removed by pushing down the red Quick Release ring. This is the perfect for VR content producers and complements Bushman's V3 PRO monopod. Further details below. IN STOCK -
The Theia Technologies FMT3555 filter mount is designed to allow attachment of M55x0.75mm diameter filters to Theia Technology mid and telephoto lenses with a 35mm diameter front barrel. A special thinner version is available for Theia 12-50mm lenses.This filter mount can be added to allow an external filter (such as band-pass or polarising filter) to be added to the system. Theia lenses are of a high quality and perfect for a wide range of imaging application.
IN STOCK -
The ARGUS scaffolding pole pivot mounting bracket is a unique product designed to fit on the top of a 48mm diameter scaffolding pole. It also features a bracket which can be tilted so you can pan and tilt the housing to the desired position before being locked into place with a clamping nut and bolt arrangement. The ARGUS range of housings and mounts are perfect for a wide range of applications and already sees regular use for long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. -
The ARGUS wall bracket allows you to attach any ARGUS housing or solar panel on to a wall. last fence post or other surfaces. It can also be used with 52mm U-bolts to fit around scaffolding poles, aerials or masts. The bracket allows you to tilt or pan the housing to the desired position before being locked into place with a clamping nut and bolt arrangement. The ARGUS range of housings and mounts are perfect for a wide range of applications and already sees regular use for long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. -
The Ulanzi BG-3 is a 10,000 mAh Power Handgrip ideal for use with action cameras, smartphones, etc when a grip handle and power are required. The battery is designed for Vlogging, ‘selfie’, video, live streaming, etc.
It can also be used in conjunction with a VR camera and monopod to provide extended battery life and extra weight by the tripod lowering the centre of gravity. IN STOCK -
The Mapir Survey3 Camera hard case allows you to protect your camera in an all weather waterproof enclosure. The case is waterproof to a depth of 30 metres (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Mapir Survey3 Camera Frame Mount allows you to mount a Survey3 camera on to GoPro style 3 pronged mounting brackets and mounting systems. The frame mount consists of the green plastic frame only (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLE SPECIAL ORDER - CONTACT US FOR AVAILABILITY -
Sale!
This wide angle S-mount (M12) High Definition 2MP resolution lens has a focal length of 6.0mm. It features a 59° horizontal angle of view when fitted on camera sensors up to 1/2" and has a F2.0 fixed aperture. -
Sale!
This Entaniya 3D Stereo VR Rig is specially designed for Back-Bone modified GoPro Hero 5, Hero 6 and Hero 7 cameras fitted with Entaniya 220 or 250 degree lenses. The system creates a lightweight VR180 Stereo camera system whilst retaining the ability to use the cameras for other purposes. The rig has a stable and accurate interocular distance of 65mm (the average distance between adult eyes) but can be adjusted at 5mm increments. This means that the rig helps to create realistic and comfortable 3D Stereo VR. IN STOCK -
The V25 / 23Watt-Hour Lithium Polymer battery features two 5V USB output ports, both rated at 2A with a combined total of 3A available. The USB Battery Pack has the critical "Always On" operating mode making it ideal for long-term time-lapse using the CamDo Solutions UpBlink intervalometer or for extending the battery life action cameras including Back-Bone modified GoPro.
The V25 features pass through charging and is optimised for solar charging using Voltaic and other equipment. WE ARE SORRY BUT WE DO NOT SHIP THESE BATTERIES OUTSIDE EUROPE IN STOCK
-
The Advanced GPS/GNSS receiver for the MAPIR Survey3 camera is included as standard with all MAPIR Survey3 cameras supplied by SeeSense. The Advanced GPS receiver provides increased image geolocation accuracy compared to the Standard GPS receiver thanks to the newer U-blox NEO-M8 module. If you require longer and / or dual cables please look at the USB cables HERE. MAPIR - MAPPING THE INVISIBLEIN STOCK -
The 3DIO Hardware Mounting Bracket for 3DIO FS, FS-XLR and FS-PRO II series microphones is designed for mounting a small HD sports camera and an external audio recorder. For example it allows you to mount a GoPro type camera in the appropriate relative location to the ears on any of the FS Series Microphones. This bracket is ideal for accurate point-of-view (POV) experiences. IN STOCK -
Bushman Panoramic offer a choice of 300 or 400g counterweight with 1/4"Male to Female adapters. They are intended to increase the stability of a Monopod and camera system by lowering its centre of gravity thus making it much less likely to fall over. Simply screw the counterweight directly on to a small tripod using the 1/4"UNC Female connection on the bottom of the counterweight, then attach the Monopod to the 1/4"UNC Male thread on top. Bushman Monopods include a counterweight; add more for increased stability. IN STOCK -
Sale!
This wide angle S-mount (M12) 2MP low distortion lens has a focal length of 4.5mm. It is designed for MACRO applications features a 78° horizontal angle of view when fitted on cameras with 1/2.3" sensors and benefits with a F1.6 fixed aperture. IN STOCK -
The Bushman Panoramic Bender is an arm with double ball head with 1/4" threads designed specifically to allow unlimited adjustment in any direction to the angle of a small VR camera mounted on to a Bushman Panoramic Monopod or Popeye. Each of the two ball heads features an O-ring to prevent any movement from vibration, and can rotate in an arc of up to 260 degree. Both ball heads are locked by a single clamp. IN STOCK -
Bushman Panoramic Popeye Magnetic Bases are composed of a series of powerful rare earth magnets sealed in black rubber to protect metal surfaces from scratching. In the centre is a 1/4" UNC male standard tripod mount thread upon which many different mounting solutions can be attached. They are available with a pull force of 45kg (Popeye) and 12kg (Baby Popeye). IN STOCK -
Use this cable to power a Survey3 camera through the USB port and view the live image from the camera from the First Person View (FPV). The cables are available in lengths of 20 or 50cm and for single or dual camera operation. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Send a PWM (pulse width modulation) signal from a drone to perform various functions via the HDMI connector on a Mapir Survey3 camera. Cables are available in lengths of 20 or 50cm and for single or dual camera operation. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Mapir have a range of cables for the Advanced GPS Receiver including 20 or 50cm cables attaching on single or dual camera systems. These Advanced GPS cable are useful if either your cable becomes damaged, you wish to modify the GPS unit by attaching to two cameras, or you require a longer cable you can order the cables by themselves! MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
SeeSense USB-C to USB-C 70cm OTG cable system designed to connect a CamDo UpBlink intervalometer to GoPro HERO 10, 11 & 12 cameras. This new improved cable is labelled "UP" to show which end of the cable connects to the UpBlink ("UP" also means this way up). This cable is also supplied with CD-180319K UpBlinks for use with GoPro Hero 10, 11 & 12 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
This custom Sony Multiport to USB-C cable from CamDo Solutions is designed for use with UpBlink to allow control of compatible Sony DSC-RX0 and DSC-RX0 II cameras. The cable is 15cm long and can be used as an upgrade purchase if you already own an UpBlink with cable for GoPro cameras. Simply update the CamDO UpBlink firmware to the latest version and now you can capture ling-term time-lapse with the superior Sony DSC-RX0 camera. Contact SeeSense for Further Information IN STOCK -
Sale!
This lens has 3MP resolution with a F3.0 aperture and is suitable for camera sensors up to 1/2.5". It features a super compact design making it ideal for use on BackBone Ribcage modified cameras and will fit modified Hero 4 cameras installed in the underwater housing. IN STOCK -
Use this compact battery charger to charge up to two Survey3 batteries using any available USB port. Input power is via a Mini USB 5V / 2. Output is 2 x 4.2V / 0.75 Amps to the batteries. BATTERIES ARE NOT INCLUDED! MAPIR - MAPPING THE INVISIBLE IN STOCK -
MAPIR Lens Protectors using an optically flat glass filter to protect the lens of Mapir Survey3 camera as well as fitting on any 22.5mm filter thread. Manufactured to resist the harshest environments the Lens Protector is a two part system consisting of a threaded clear glass abrasion resistant (AR) filter and a lens slip mount surround which fastens to the camera lens with 3 opposing set screws. MAPIR - MAPPING THE INVISIBLE IN STOCK -
Sale!
This custom fully pinned USB-C to USB-C cable from CamDo Solutions is designed for use with the CamDo UpBlink intervalometer connecting to GoPro HERO 5, 6 7 and 8 cameras. The cable is 30cm long and allows a CamDo UpBlink intervalometer to interface with a GoPro camera. This cable is also supplied with CD-180310K UpBlink kits for use with GoPro Hero 5 - 8 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
The 3Dio Grip Handle is perfect for the hand-held operation of any 3Dio microphone. It is a convenient alternative mounting your 3Dio microphone on to tripod or mic stand but can also be sued with our Back-Bone cameras or Bushman monopod. It features a rubber handle, 1/4" Male thread for attaching to the microphone and 1/4" Female tripod thread to fit to on to a tripod, monopod or mic stand along with an optional circular split cotter "keyring"attachment. The 3Dio grip handle is perfect for field recording and situations where a microphone will be hand held. IN STOCK -
Sale!
This wide angle S-mount (M12) 5MP IR (no IR cut filter) lens has a focal length of 4.0mm. It features a 91° horizontal angle of view when fitted on cameras with 1/2.3" sensors and benefits with a F1.8 fixed aperture. IN STOCK -
This standard GPS receiver uses a cheaper ublox UBX-G7020-KT chip inside to provide a quick GPS fix for the MAPIR Survey3 camera. Our Mapir camera systems are now supplied with the advanced GPS receiver for improved performance. When the camera has satellite lock it will beep 6 times. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Sale!
The BackBone Sidearm is a snap in accessory providing four standard 1/4"-20 tripod mounting points on your camera. The Sidearm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidearm replaces the camera's side door. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
Sale!
This low profile mount is used to attach M12 lenses which will not focus using the standard Back-Bone M12 to CS-mount adapter. It is compatible with all Back-Bone PRO (H8-5) modified GoPro cameras. The Low Profile Mount can be mounted flush or reversed to add more thread to the front of the camera. IN STOCK -
The Bushman Monkey Clamp is a simple device that allows you to attach cameras and other equipment securely. The jaws can open to a maximum width of 40mm and have a rubber cover to protect and grip on the surfaces the clamp is attached to. The bracket features 1/4 and 3/8"UNC female standard tripod mounts. IN STOCK -
The Bushman Panoramic Compass Level is a new and innovative product designed to assist and improve VR photography. Firstly there is a compass; this allows you to obtain a reference point when taking multiple images in a VR tour. The second feature is a bubble level which can be used in instances when you require your equipment to be set up in a stable and level position. This is the perfect accessory to own if you are creating virtual tours. IN STOCK -
This tripod mount help make your GoPro Hero 8, 9, 10 or 11 Black camera into a SUPERHERO! The machined aluminium three point tripod mount is designed as a much stronger high quality replacement for the plastic folding GoPro mount. This Back-Bone tripod mount features a machined aluminium body with three standard 1/4"-20 standard tripod mounting points. It is very easy to exchange between mounts; all tools are included. It is also compatible with Back-Bone modified H8PRO, H9PRO, H10PRO & H11PRO cameras. MAKING THE GoPro HERO INTO A SUPERHERO! IN STOCK -
The Bushman Ground Spike is a simple device that screws into the ground to provide a secure base for attaching cameras, monopods, poles, mounting devices, etc. IN STOCK -
Bushman Panoramic Magic cable is designed for USB A power featuring feeding to a magnetic terminal with 3 in 1 choice of connectors. This allows you to attach 3 different ends to it – Micro USB-B, USB-C, and Apple Lighting. The standard 20cm cable was designed specifically for use with the Bushman Halo 360 Light to make it easier to connect and disconnect a range of cameras quickly and efficiently. However this and the 1m cable can be used with a wide range of other devices including your phone and other accessories where a quick release connector is useful and safer. IN STOCK -
This custom OTG cable is used for updating Blink firmware. It enables the Blink to act as the host, with the USB flash drive as a peripheral that can be accessed by Blink to update the controller from a file on the drive. The USB-A connection is used to power the Blink Intervalometer and flash drive.Contact SeeSense for Further InformationLIMITED REMAINING STOCK -
Spare 5 volt, 1200 mAh, 4.44Wh battery for MAPIR Survey3 camera. A battery is supplied with the camera but it is advisable to have a spare! MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Bushman Panoramic 1/4″ Spacer is ideal when you need to raise a camera or accessory by around 50mm. The 1/4" Spacer was designed for use with Bushman Panoramic Monopods, Corepoles, tripod, or magnetic bases. It is equally at home integrating with any mounting system that utilises 1/4"UNC thread such a Swivellink equipment available from SeeSense. Ideal for use with VR cameras, miniature cameras, compact lighting systems, etc. IN STOCK -
Bushman Panoramic USB-A 90 degree to USB-C cable is designed to charge the Bushman Halo 360 Light or any other device requiring a USB-C power cable. This high quality braided cable measures 50cm long and incorporates metal bodied connectors. IN STOCK -
The Mapir Survey3 Camera Clip allows you to retain one Survey3 camera on to Mapir static drone mount. Whenever you purchase a Mapir Static Mount from SeeSense this camera clip is included where required. However it is recommended to keep a spare in case you lose one! MAPIR - MAPPING THE INVISIBLEIN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu