IN STOCK
DISCOUNTED PRICING AVAILABLE IN OUR MAPIR BUNDLES - CONTACT US
-
The MAPIR T3-R50 Diffuse Reflectance Calibration Ground Target Package contains a series of 4 reflectance targets with known reflectance curves. UNLIKE drone "sunlight sensors" this target allows users to obtain accurately repeatable calibrated images through the seasons and in differing weather / lighting conditions. This target can be used for calibrating images with Mapir and any other brand of multispectral camera. A larger T3-R125 target is also available. Before commencing a crop mapping survey cameras should capture an image of the entire target. This can then be used to help calibrate images captured in the image processing software. We therefore highly recommend that you purchase the Mapir Camera Reflectance Calibration Target to complete your system. MAPIR - MAPPING THE INVISIBLE -
The Theia Technologies FMT3555 filter mount is designed to allow attachment of M55x0.75mm diameter filters to Theia Technology mid and telephoto lenses with a 35mm diameter front barrel. A special thinner version is available for Theia 12-50mm lenses.This filter mount can be added to allow an external filter (such as band-pass or polarising filter) to be added to the system. Theia lenses are of a high quality and perfect for a wide range of imaging application.
IN STOCK -
The Advanced GPS/GNSS receiver for the MAPIR Survey3 camera is included as standard with all MAPIR Survey3 cameras supplied by SeeSense. The Advanced GPS receiver provides increased image geolocation accuracy compared to the Standard GPS receiver thanks to the newer U-blox NEO-M8 module. If you require longer and / or dual cables please look at the USB cables HERE. MAPIR - MAPPING THE INVISIBLEIN STOCK -
This standard GPS receiver uses a cheaper ublox UBX-G7020-KT chip inside to provide a quick GPS fix for the MAPIR Survey3 camera. Our Mapir camera systems are now supplied with the advanced GPS receiver for improved performance. When the camera has satellite lock it will beep 6 times. MAPIR - MAPPING THE INVISIBLEIN STOCK -
The 3Dio Grip Handle is perfect for the hand-held operation of any 3Dio microphone. It is a convenient alternative mounting your 3Dio microphone on to tripod or mic stand but can also be sued with our Back-Bone cameras or Bushman monopod. It features a rubber handle, 1/4" Male thread for attaching to the microphone and 1/4" Female tripod thread to fit to on to a tripod, monopod or mic stand along with an optional circular split cotter "keyring"attachment. The 3Dio grip handle is perfect for field recording and situations where a microphone will be hand held. IN STOCK -
The Shokz OpenComm2 is a unique and special headset that utilises 'OpenEar', 'DirectPitch' and 'Bone Conduction' technology. Designed for mobile work, the OpenComm2's open-ear design keeps you connected to the world without compromising on comfort or audio quality. This headset enables you to hear sirens, traffic and what ever else is happening in your environment whilst listening to music or linked to a phone. In our opinion this means that the Shokz OpenComm2 the best and safest headset to wear for situational awareness in areas where health and safety are important. IN STOCK -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
Sale!
The ARGUS IP55 rated camera housing is designed to accommodate small self contained action cameras along with any accessories required such as a battery, power supply, time-lapse intervalometer, etc. It comprises a waterproof enclosure with optically flat glass window and female 1/4" tripod mounts below . An adjustable camera mounting plate is included enabling the camera and lens to be positioned close to the housing's glass window for optimal performance. -
Sale!
The CamDo DryX weatherproof outdoor enclosure can accommodate a GoPro Hero 4 - 12 or Sony DSC-RX0 camera, intervalometer and battery. It is designed to be crush proof, air tight, UV resistant and built to survive in a hostile environment. The rear of the enclosure has a metal frame used for fastening in position. This can also accommodate a swivel bracket and up to two 9W SolarX panels also available from SeeSense. The complete system is ideal for long-time time-lapse in construction, general photography, wildlife photography or scientific research applications. IN STOCK -
The Mapir Survey3 Camera hard case allows you to protect your camera in an all weather waterproof enclosure. The case is waterproof to a depth of 30 metres (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
Our SeeSense IP55 rated camera housings are designed to accommodate small self contained action cameras along with any accessories required such as a battery, power supply, time-lapse intervalometer, etc. Available in lengths of 15, 20, 25 and 30cm (see photo). They comprise a waterproof enclosure with optically flat glass window and two 15mm glands for power inputs, video outputs, etc. An adjustable camera mounting plate is included enabling the camera and lens to be positioned close to the housing's glass window for optimal performance. The housing base features two 1/4”-20 UNC standard tripod mounting points for installation directly on to a tripod or the included mounting bracket. Ideal low cost solution for a wide range of applications including long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. IN STOCK (N.B. Some items may be special order) -
DISCONTINUED SUPERSEDED BY THE CAMDO UPBLINK The CamDo Blink is is a low power, WiFi enabled time-lapse intervalometer compatible with all GoPro Hero 4 and Hero 3+ Black cameras. This professional accessory helps unlock the full potential of GoPro cameras for long term time-lapse photography up to 4K resolution and includes a USB connector for external power considerably increasing the operation time of the camera. DISCONTINUED -
DISCONTINUED SUPERSEDED BY THE CAMDO UPBLINK The CamDo BLINK X is a long term lapse intervalometer designed to connect with GoPro Hero 8, 7, 6, 5 and 5 Session cameras. The design incorporates a WiFi interface which simplifies configuration of up to 10 separate schedules on the User Interface. The BlinkX can be triggered by the intervalometer or external source such as multi-camera array or an X-band motion sensor to capture single images or videos. Perfect for long term construction time-lapse DISCONTINUED -
Sale!
The CamDo UpBlink is a low power, WiFi enabled time-lapse intervalometer which is compatible with the Sony DSC-RX0 series as well as the GoPro Hero camera range. It provides a flexible, reliable and accurate means of setting different time date and frequency settings for long-term time-lapse. We do not recommend this system for frequencies less than 5 minutes. This professional accessory helps unlock the full potential of GoPro and Sony DSC-RX0 cameras for long term time-lapse photography up to 5.3K resolution. Each system includes a dedicated cable connecting the intervalometer to the camera plus an USB connector for external power considerably increasing the operation time of the camera. * Also compatible with Back-Bone modified versions of these cameras. IN STOCK -
MAPIR Lens Protectors using an optically flat glass filter to protect the lens of Mapir Survey3 camera as well as fitting on any 22.5mm filter thread. Manufactured to resist the harshest environments the Lens Protector is a two part system consisting of a threaded clear glass abrasion resistant (AR) filter and a lens slip mount surround which fastens to the camera lens with 3 opposing set screws. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This super sharp S-mount (M12) 16MP(4K) lens has a focal length of 16mm featuring a 26.8° horizontal angle of view when fitted on 1/1.8" camera sensors. It has a F2.8 fixed aperture and is available with an IR cut filter fitted or removed. It is perfect for use with Back-Bone modified GoPro cameras (also supplied by SeeSense) as well as many other high quality cameras. IN STOCK -
This super sharp wide angle S-mount (M12) 12MP 4K low distortion lens has a 2.7mm focal length lens producing a 85° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing near zero ‘fisheye’ distortion and excellent edge to edge sharpness. It is perfect for use with all Back-Bone modified GoPro Hero cameras and is also supplied by SeeSense for other high quality cameras used in wide range of different specialist camera applications. IN STOCK -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 2.97mm focal length lens producing a 87° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing zero ‘fisheye’ distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. IN STOCK -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 3.65mm focal length lens producing a 82° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing zero ‘fisheye’ distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. OUT OF STOCK -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 3.8mm focal length lens producing a 83.5° horizontal angle of view on 1/2.3"sensors. It features a rectilinear IR corrected lens design producing almost zero barrel distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. IN STOCK -
This narrow angle S-mount (M12) 8MP lens has a focal length of 35mm. It features a 11.1° horizontal angle of view when fitted on 1/2" camera sensors. The lens works well with Back-Bone modified GoPro cameras also supplied by SeeSense plus other cameras featuring and M12 (S-mount). The lens is great for general shooting as well as specialist broadcast, film and industrial applications where a telephoto view is required. IN STOCK -
Sale!
This wide angle S-mount (M12) 5MP IR (no IR cut filter) lens has a focal length of 4.0mm. It features a 91° horizontal angle of view when fitted on cameras with 1/2.3" sensors and benefits with a F1.8 fixed aperture. IN STOCK -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 4.2mm focal length lens producing a 73° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing little barrel distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. AWAITING STOCK - PLEASE CONTACT US FOR AVAILABLITY -
This super sharp wide angle S-mount (M12) 16MP 4K lens has a 4.35mm focal length lens producing a 72° horizontal angle of view on 1/2.3"sensors. It features a rectilinear lens design producing zero ‘fisheye’ distortion and excellent edge to edge sharpness. It is perfect for use with Back-Bone modified GoPro cameras also supplied by SeeSense and other high quality cameras used in wide range of different specialist camera applications. IN STOCK -
This wide angle S-mount (M12) 10MP 4K resolution low distortion lens has a focal length of 4.4mm. It features a 71° horizontal angle of view when fitted on camera sensors up to 1/2" and has a F2.0 fixed aperture. -
Sale!
This wide angle S-mount (M12) 2MP low distortion lens has a focal length of 4.5mm. It is designed for MACRO applications features a 78° horizontal angle of view when fitted on cameras with 1/2.3" sensors and benefits with a F1.6 fixed aperture. IN STOCK -
This S-mount (M12) 12MP 4K resolution lens has a focal length of 5.4mm. It features a 60° horizontal angle of view when fitted on camera sensors up to 1/2.3" and has a F2.8 fixed aperture. IN STOCK -
This narrow angle S-mount (M12) 12MP lens has a focal length of 50mm. It features a 8.6° horizontal angle of view when fitted on 1/1.7" camera sensors. The lens works well with Back-Bone modified GoPro cameras also supplied by SeeSense plus other cameras featuring and M12 (S-mount). The lens is great for general shooting as well as specialist broadcast, film and industrial applications where a telephoto view is required. IN STOCK -
Sale!
This wide angle S-mount (M12) High Definition 2MP resolution lens has a focal length of 6.0mm. It features a 59° horizontal angle of view when fitted on camera sensors up to 1/2" and has a F2.0 fixed aperture. -
This 12 megapixel S-mount (M12) 4K lens has a focal length of 6.8mm. It features a 50.6° horizontal angle of view when fitted on cameras with sensors up to 1/2.3". This lens has an IR cut filter fitted on the rear. Ideal for use on all BackBone Ribcage modified GoPro cameras, drone and gimbal use and great for general shooting. IN STOCK -
This S-mount (M12) 8MP 4K resolution lens has a focal length of 7.2mm. It features a 50.6° horizontal angle of view when fitted on camera sensors up to 1/2.3" and has a F2.5 fixed aperture. -
Sale!
This lens has 3MP resolution with a F3.0 aperture and is suitable for camera sensors up to 1/2.5". It features a super compact design making it ideal for use on BackBone Ribcage modified cameras and will fit modified Hero 4 cameras installed in the underwater housing. IN STOCK