-
Sale!
This custom fully pinned USB-C to USB-C cable from CamDo Solutions is designed for use with the CamDo UpBlink intervalometer connecting to GoPro HERO 5, 6 7 and 8 cameras. The cable is 30cm long and allows a CamDo UpBlink intervalometer to interface with a GoPro camera. This cable is also supplied with CD-180310K UpBlink kits for use with GoPro Hero 5 - 8 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
The 3Dio Grip Handle is perfect for the hand-held operation of any 3Dio microphone. It is a convenient alternative mounting your 3Dio microphone on to tripod or mic stand but can also be sued with our Back-Bone cameras or Bushman monopod. It features a rubber handle, 1/4" Male thread for attaching to the microphone and 1/4" Female tripod thread to fit to on to a tripod, monopod or mic stand along with an optional circular split cotter "keyring"attachment. The 3Dio grip handle is perfect for field recording and situations where a microphone will be hand held. IN STOCK -
Sale!
This wide angle S-mount (M12) 5MP IR (no IR cut filter) lens has a focal length of 4.0mm. It features a 91° horizontal angle of view when fitted on cameras with 1/2.3" sensors and benefits with a F1.8 fixed aperture. IN STOCK -
This standard GPS receiver uses a cheaper ublox UBX-G7020-KT chip inside to provide a quick GPS fix for the MAPIR Survey3 camera. Our Mapir camera systems are now supplied with the advanced GPS receiver for improved performance. When the camera has satellite lock it will beep 6 times. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Sale!
The BackBone Sidearm is a snap in accessory providing four standard 1/4"-20 tripod mounting points on your camera. The Sidearm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidearm replaces the camera's side door. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
Sale!
This low profile mount is used to attach M12 lenses which will not focus using the standard Back-Bone M12 to CS-mount adapter. It is compatible with all Back-Bone PRO (H8-5) modified GoPro cameras. The Low Profile Mount can be mounted flush or reversed to add more thread to the front of the camera. IN STOCK -
The Bushman Monkey Clamp is a simple device that allows you to attach cameras and other equipment securely. The jaws can open to a maximum width of 40mm and have a rubber cover to protect and grip on the surfaces the clamp is attached to. The bracket features 1/4 and 3/8"UNC female standard tripod mounts. IN STOCK -
The Bushman Panoramic Compass Level is a new and innovative product designed to assist and improve VR photography. Firstly there is a compass; this allows you to obtain a reference point when taking multiple images in a VR tour. The second feature is a bubble level which can be used in instances when you require your equipment to be set up in a stable and level position. This is the perfect accessory to own if you are creating virtual tours. IN STOCK -
This tripod mount help make your GoPro Hero 8, 9, 10 or 11 Black camera into a SUPERHERO! The machined aluminium three point tripod mount is designed as a much stronger high quality replacement for the plastic folding GoPro mount. This Back-Bone tripod mount features a machined aluminium body with three standard 1/4"-20 standard tripod mounting points. It is very easy to exchange between mounts; all tools are included. It is also compatible with Back-Bone modified H8PRO, H9PRO, H10PRO & H11PRO cameras. MAKING THE GoPro HERO INTO A SUPERHERO! IN STOCK -
The Bushman Ground Spike is a simple device that screws into the ground to provide a secure base for attaching cameras, monopods, poles, mounting devices, etc. IN STOCK -
Bushman Panoramic Magic cable is designed for USB A power featuring feeding to a magnetic terminal with 3 in 1 choice of connectors. This allows you to attach 3 different ends to it – Micro USB-B, USB-C, and Apple Lighting. The standard 20cm cable was designed specifically for use with the Bushman Halo 360 Light to make it easier to connect and disconnect a range of cameras quickly and efficiently. However this and the 1m cable can be used with a wide range of other devices including your phone and other accessories where a quick release connector is useful and safer. IN STOCK -
This custom OTG cable is used for updating Blink firmware. It enables the Blink to act as the host, with the USB flash drive as a peripheral that can be accessed by Blink to update the controller from a file on the drive. The USB-A connection is used to power the Blink Intervalometer and flash drive.Contact SeeSense for Further InformationLIMITED REMAINING STOCK -
Spare 5 volt, 1200 mAh, 4.44Wh battery for MAPIR Survey3 camera. A battery is supplied with the camera but it is advisable to have a spare! MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Bushman Panoramic 1/4″ Spacer is ideal when you need to raise a camera or accessory by around 50mm. The 1/4" Spacer was designed for use with Bushman Panoramic Monopods, Corepoles, tripod, or magnetic bases. It is equally at home integrating with any mounting system that utilises 1/4"UNC thread such a Swivellink equipment available from SeeSense. Ideal for use with VR cameras, miniature cameras, compact lighting systems, etc. IN STOCK -
Bushman Panoramic USB-A 90 degree to USB-C cable is designed to charge the Bushman Halo 360 Light or any other device requiring a USB-C power cable. This high quality braided cable measures 50cm long and incorporates metal bodied connectors. IN STOCK -
The Mapir Survey3 Camera Clip allows you to retain one Survey3 camera on to Mapir static drone mount. Whenever you purchase a Mapir Static Mount from SeeSense this camera clip is included where required. However it is recommended to keep a spare in case you lose one! MAPIR - MAPPING THE INVISIBLEIN STOCK -
Sale!
IN STOCKGreat quality low cost USB Power Supply to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. This assembly comprises an Anker A2124 PowerPort 5 port 40 watt USB-A power supply. PowerIQ and VoltageBoost combine to provide the fastest possible charge up to 2.4 amps per port or 8 amps overall. These are all brand new and in A1 condition. Available while stocks last. -
Voltaic Systems supply a series of extension cables with waterproof connectors which are primarily designed for connecting their solar panels to a battery. These standard cables are available in lengths of 30cm (1 foot), 1.25m (4 feet) or 3m (10 feet). The incorporate a 3.5 x 1.1mm male and female connector. These connectors also have a shroud which slides over the mating connector to make the cable totally waterproof. IN STOCK -
Voltaic Systems have a 5V Regulator USB cable that connects directly to any Voltaic Systems 6 Volt solar panel allowing you to safely charge any USB device, smartphone, or tablet directly from the sun. No battery pack is required, simply charge using your device's USB charging cable. Nice and simple - NO ELECTRONICS REQUIRED! IN STOCK -
Sale!
The BackBone Sidekick is an accessory providing a standard 1/4"-20 tripod mounting point for your camera. The Sidekickm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidekick replaces the camera's side door. N.B. The camera is not waterproof while the Sidekick is fitted. IN STOCK -
The Bushman Camera Holder features a 1/4"-12 UNC male tripod mounting thread that can be screwed directly into the tripod mount of a small camera allowing you to attach it to a strap or small carabiner clip. Keep your action camera, or VR camera safe by wearing it around your neck. The Camera Holder features a rubber pad to help hold the camera tight and protect it from being scratched by the camera holder. IN STOCK -
Voltaic Systems supply a splitter cable which is primarily designed for connecting two of their solar panels to a battery. The splitter cable also integrates directly with Voltaic extension cables. The cable features a 3.5 x 1.1mm male which splits to feed TWO 3.5 x 1.1mm female connectors. The female connectors also have a shroud which slides over the mating connector to make the cable totally waterproof. IN STOCK -
Sale!
Great quality low cost phone mount to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. This assembly comprises an Ulanzi ST-04 smartphone mount and JOBY JB01346 1/4”-20 hub adapter. We purchased these for V-logging but the assembly could be used for other applications. The removable phone mount features rubber grips and can accommodate smartphones from 76 - 109mm wide. It can attach to any 1/4"-20-compatible accessory mount. These are all brand new and in A1 condition. Available while stocks last. IN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
Sale!
Great quality low cost tripod to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These Ulanzi MT-05 plastic tripods came with a bunch of Ulanzi BG-3 batteries that we fit in Avatour systems but use a larger tripod! These tripods are brand new and in A1 condition. Available while stocks last. IN STOCK -
Set of 4 replacement medium hardness dampening balls for MAPIR camera mounts. These balls are standard on all Mapir static camera mounts that utilise 4 balls for vibration dampening. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 30cm USB 2.0 braided cables manufactured by Sunguy come with a USB-A Right Angle and Micro USB Right Angle connector. These cables have been previously used in demonstration kits and are in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 30cm USB 2.0 braided cables manufactured by Sunguy come with a USB-A Right Angle and USB-C Right Angle connector. These cables have been previously used in demonstration kits and are in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 0.5m USB 2.0 cables come with a USB-A and USB-C connector. These cables are brand new and in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 1.0m USB 2.0 cables come with a USB-A and USB-C connector. These cables are brand new and in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 1.0m USB 2.0 cables come with a USB-C and USB-C connector. These cables are brand new and in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 0.3m USB 2.0 White PVC cables come with a USB-A and USB-C connector. These cables are brand new and in A1 condition. Available while stocks last. IN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu