The Swivellink SLM-CB Table Clamp can be used to mount any Swivellink system on to the edge of a table between 16mm and 35mm thick. A screw with a plastic knob is used to tighten the SLM-CB. Machined from aluminium it includes a variety of drilled holes for fastening Swivellink SLM-1 or SLM-1XS bases to the Table Clamp Base.
CONTACT US regarding your requirement
IN STOCK
-
DISCONTINUED SUPERSEDED BY THE CAMDO UPBLINK The CamDo Blink is is a low power, WiFi enabled time-lapse intervalometer compatible with all GoPro Hero 4 and Hero 3+ Black cameras. This professional accessory helps unlock the full potential of GoPro cameras for long term time-lapse photography up to 4K resolution and includes a USB connector for external power considerably increasing the operation time of the camera. DISCONTINUED -
Sale!
This swivel mount kit consists of a 15cm straight swing arm attached to a vertical mounting base for attachment to a flat or rounded surface such as a wall or post. At the opposite end is a ball socket used with the 1.5" ball mount plate that can be attached directly to the CamDo DryX enclosure for maximum flexibility. An insert on the vertical mounting plate to allow solid mounting to a flat surface like a building or a rounded surface such as a pole or rail. The mount includes spare lock nuts to replace the knobs for extra security. IN STOCK -
Sale!
The BackBone Sidearm is a snap in accessory providing four standard 1/4"-20 tripod mounting points on your camera. The Sidearm is suitable for GoPro Hero 5, 6 and 7 cameras plus Ribcage modified cameras of the same design. Manufactured from high grade aluminium the Sidearm replaces the camera's side door. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
Sale!
This Entaniya 3D Stereo VR Rig is specially designed for Back-Bone modified GoPro Hero 5, Hero 6 and Hero 7 cameras fitted with Entaniya 220 or 250 degree lenses. The system creates a lightweight VR180 Stereo camera system whilst retaining the ability to use the cameras for other purposes. The rig has a stable and accurate interocular distance of 65mm (the average distance between adult eyes) but can be adjusted at 5mm increments. This means that the rig helps to create realistic and comfortable 3D Stereo VR. IN STOCK -
The Swivellink SLM-1 standard metric grey ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions or directly on to the mounting point of choice. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-1XS Small metric grey ball base features two 5mm holes spaced at 25mm for attaching to your preferred base material. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2 metric grey standard knuckle uses a double socket configuration to clamp to the ball of a standard base, standard link, or standard sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2-2XS is a cross-over metric knuckle adapter designed to connect Standard to XS Series Fittings. It uses a double socket configuration to clamp to the ball of a Standard or XS base, link, or small sensor mount depending on the connection end utilised. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-290 Standard series metric knuckle is designed as a tee connector working in conjunction with the Standard series SLM-3T Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS small metric grey standard knuckle uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3TSL-15-250 provides the flexibility to adjust or fit a precise link length of between 15 and 25cm long. It incorporates a through hole for routing wires, cables, or small hoses. For example this is ideal if you wanted to be able to adjust the height of a monitor. The design also allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS90 small metric grey standard knuckle is designed as a tee connector working in conjunction with the XS series SLM-3XST Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Swivellink SLM-3T Standard Series Metric Tee Link The Swivellink Standard range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The SLM-3T Tee link allows you to create two separate branches using a SLM-290 Tee Knuckle connector attached to the centre ball. It incorporates a 19mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 19mm x 38mm slot for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Standard range utilises a series of LINKS to extend the reach of the mounting system between knuckle couplers. Where a Link piece is not long enough for needs adapting the SLM-3 Ball Adapter can be used instead. It is a standard 28.5mm ball with a 3/8"-19 BSPT thread so you can attach a pipe of any length! The ball includes machined spanner flats for tightening the pipe on the the adapter. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The Swivellink SLM-4 Button Mount enables you to fit a push button into your system. For example a machine might require the provision of a cycle start or emergency stop button. The SLM-4 is threaded M30 x 1.5 and has plenty of room for the cable connection inside. The robust design allows for a large range of motion while maintaining the cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The metric grey SLM-6 blank mounting plate is designed so you can drill and mount your equipment on to a plate. The SLM-6 includes drillings to accommodate the SLM-1 Standard Ball Base plus a slot to accommodate the exit of cables, wire or pipes that have passed through the centre of the Swivellink system. Four M5 x 14 socket cap setscrews are included for attaching the SLM-1. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-570XS-GP Small XS Series Metric GoPro Mount allows you to attach any device with a standard blade type GoPro mount. This makes Swivellink an ideal high quality mounting system for action cameras of all kind. As well as standard GoPro cameras and housings this mount enables you to directly attach the BackBone H8PRO modified Hero8 Black camera. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-6XS Small Metric XS Series Blank Mounting Plate is designed so you can drill and mount your equipment on to a plate. The SLM-6XS includes drillings to accommodate the SLM-1XS Small Ball Base in a choice of two positions. Two M5 x 12 socket cap setscrews are included for attaching the SLM-1XS. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) Male Tripod Mount is designed to attach to cameras, mounting plates, etc with a standard tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XS can fit Standard Swivellink components by attaching to the SLM-2-2XS coupler adapter. SeeSense also offer a SPECIAL version of this part with a 1/4-20 (1/4"UNC) female thread - SLM-5XSF.The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense modified Swivellink SLM-5XSF Small Ball 1/4"-20 (1/4"UNC) Female Tripod Mount features a 1/4-20 (1/4"UNC) FEMALE thread designed to attach to tripods, magnetic mounting plates, etc with a standard 1/4"UNC male tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XSF can fit Standard Series Swivellink components by attaching to the SLM-2-2XS coupler adapter. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3XST Small XS Series Metric Tee Link allows you to create two separate branches using a SLM-290XS Tee Knuckle connector attached to the centre ball. It incorporates a 10mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 10mm hole for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Mapir Survey3 Camera Frame Mount allows you to mount a Survey3 camera on to GoPro style 3 pronged mounting brackets and mounting systems. The frame mount consists of the green plastic frame only (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLE SPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
The Theia Technologies MY125M 5 Megapixel 1.28mm C-mount Day/Night lens achieves 125° horizontal angle of view on a 1/3” sensor using patented Linear Optical Technology®. It achieves an ultra-wide field of view with ULTRA LOW DISTORTION (<3% barrel). It is suitable for camera sensors up to 1/2.5" and has a manual iris range from F1.8 -Closed. IN STOCK -
The Canon IK-4K is the world’s smallest Ultra HD 3-CMOS, 4K video remote head camera system providing 8MP 1600 TVL resolution and 3840 x 2160 output. This feature rich compact camera provides amazingly sharp detail and exceptional colour performance; it enhances many video applications from life sciences, professional film / broadcast, scientific imaging, through to defence. The IK-4K is ideal when 4K images are desired and space is limited providing absolutely the best quality images possible. Because of the specialist nature of this camera we suggest that you contact us for current pricing and for a quotation. -
This Mapir Single Static mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 1 or 2 drone whilst keeping the original camera installed. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to an Auto EVO drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This standard GPS receiver uses a cheaper ublox UBX-G7020-KT chip inside to provide a quick GPS fix for the MAPIR Survey3 camera. Our Mapir camera systems are now supplied with the advanced GPS receiver for improved performance. When the camera has satellite lock it will beep 6 times. MAPIR - MAPPING THE INVISIBLEIN STOCK -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
The Entaniya HAL250 range of 250° 8K resolution fisheye lenses enables the capture of unique wide-angle images well beyond a normal field of view. Despite having a 250° angle of view, the lens quality reveals few aberrations or fringing making it one if the best quality fisheye lenses in the world. The Entaniya HAL 250 2.3mm lens is designed to suit a φ9mm Image Circle and is compatible with a wide range of cameras. It is available with a MFT mount and features interchangeable fixed Aperture Rings, Neutral Density filters and rear objective. Please contact us or refer to the datasheet tab for technical details including sensor coverage and image circle information. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
The Entaniya HAL250 range of 250° 8K resolution fisheye lenses enables the capture of unique wide-angle images well beyond a normal field of view. Despite having a 250° angle of view, the lens quality reveals few aberrations or fringing making it one if the best quality fisheye lenses in the world. The Entaniya HAL 250 4.3mm lens is designed to suit a φ17mm Image Circle and is compatible with a wide range of cameras. It is available with a EF and Sony E mount and features interchangeable fixed Aperture Rings, Neutral Density filters and rear objective. Please contact us or refer to the datasheet tab for technical details including sensor coverage and image circle information. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
The Entaniya HAL250 range of 250° 8K resolution fisheye lenses enables the capture of unique wide-angle images well beyond a normal field of view. Despite having a 250° angle of view, the lens quality reveals few aberrations or fringing making it one if the best quality fisheye lenses in the world. The Entaniya HAL 250 6.0mm lens is designed to suit a φ23.7mm Image Circle and is compatible with a wide range of cameras. It is available with a EF and Sony E mount and features interchangeable fixed Aperture Rings, Neutral Density filters and rear objective. Please contact us or refer to the datasheet tab for technical details including sensor coverage and image circle information. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
The Entaniya HAL220 range of 220° 8K resolution fisheye lenses enables the capture of unique wide-angle images well beyond a normal field of view. Despite having a 220° angle of view, the lens quality reveals few aberrations or fringing making it one if the best quality fisheye lenses in the world. The Entaniya HAL 220 PL-mount lens features interchangeable spacers to provide an optimised coverage of a wide range of large format camera sensors with an image circle from 22.6 - 29.8mm diameter. Two adjustable iris options are available. Please contact us or refer to the datasheet tab for technical details including sensor coverage and image circle information. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
Sale!
This low profile mount is used to attach M12 lenses which will not focus using the standard Back-Bone M12 to CS-mount adapter. It is compatible with all Back-Bone PRO (H8-5) modified GoPro cameras. The Low Profile Mount can be mounted flush or reversed to add more thread to the front of the camera. IN STOCK -
The Theia Technologies 3 Megapixel 1.67mm CS-mount Day/Night lens range achieve 110° horizontal angle of view on a 1/3” sensor using patented Linear Optical Technology® and are suitable for sensors up to 1/2.5". These CS-mount lenses are available with Manual Iris (SY110M) or DC-iris (SY10A) and have an iris range from F1.8-Closed. They achieve an ultra-wide field of view with ULTRA LOW DISTORTION (<1% barrel). IN STOCK -
The Theia Technologies 5 Megapixel 1.28mm CS-mount Day/Night lens range achieve 125° horizontal angle of view on a 1/3” sensor using patented Linear Optical Technology® and are suitable for sensors up to 1/2.5". These CS-mount lenses are available with Manual Iris (SY125M) or DC-iris (SY125A) and have an iris range from F1.8-Closed. They achieve an ultra-wide field of view with ULTRA LOW DISTORTION (<3% barrel). IN STOCK -
The Theia Technologies 12-50mm CS-mount Day/Night lens range achieves a 4K resolution 35-8.5° horizontal angle of view on a 1/1.8” 4K sensor. These CS-mount lenses are available with Manual Iris (SL1250M), DC-iris (SL1250A) or P-iris (SL1250P) and have an iris range from F1.8-Closed. An optional filter mount is also available. IN STOCK -
There are seven mounts available to attach MAPIR Survey3 cameras securely on to 3DR Solo drones with a combination of Single, Dual or Quad camera with Static or Tilting Mount options. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the DJI Inspire 2 drone with Tilting Single or Dual camera Mounts. Each mount comes with camera clips and features a simple two screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLEIN STOCK -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the DJI Inspire 1 drone with Tilting Single or Dual camera Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLEIN STOCK -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the 3DR X8 drone with Static Single or Dual camera Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - PLEASE CONTACT US FOR AVAILABILITY -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. They incorporate a 10mm diameter through hole for routing wires, cables, or small hoses. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Small XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Bushman Panoramic Corepole is as a 190cm long carbon fibre telescopic pole designed for larger VR cameras whilst hiding unsightly cables inside. The ideal is that unsightly cables ruin image quality in VR360 and VR180 videos and images. This solution keeps them hidden whilst providing a strong and stable support for the camera. Bushman Corepole BUNDLE also available. SPECIAL ORDER -
Sale!
The Bushman Panoramic Corelite is as a 90cm long carbon fibre telescopic pole designed for larger VR cameras whilst hiding unsightly cables inside. The ideal is that unsightly cables ruin image quality in VR360 and VR180 videos and images. This solution keeps them hidden whilst providing a strong and stable support for the camera. SPECIAL ORDER -
The Entaniya HAL250 range of 250° 8K resolution fisheye lenses enables the capture of unique wide-angle images well beyond a normal field of view. Despite having a 250° angle of view, the lens quality reveals few aberrations or fringing making it one if the best quality fisheye lenses in the world. The Entaniya HAL 250 3.0mm lens is designed to suit a φ11.9mm Image Circle and is compatible with a wide range of cameras. It is available with a MFT, Sony E and C-mount and features interchangeable fixed Aperture Rings, Neutral Density filters and rear objective. Please contact us or refer to the datasheet tab for technical details including sensor coverage and image circle information. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING