The Swivellink SLM-570XS-GP Small XS Series Metric GoPro Mount allows you to attach any device with a standard blade type GoPro mount. This makes Swivellink an ideal high quality mounting system for action cameras of all kind. As well as standard GoPro cameras and housings this mount enables you to directly attach the BackBone H8PRO modified Hero8 Black camera. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position.
CONTACT US regarding your requirement
IN STOCK
-
The Swivellink SLM-6XS Small Metric XS Series Blank Mounting Plate is designed so you can drill and mount your equipment on to a plate. The SLM-6XS includes drillings to accommodate the SLM-1XS Small Ball Base in a choice of two positions. Two M5 x 12 socket cap setscrews are included for attaching the SLM-1XS. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-5XS Small Ball 1/4"-20 (1/4"UNC) Male Tripod Mount is designed to attach to cameras, mounting plates, etc with a standard tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XS can fit Standard Swivellink components by attaching to the SLM-2-2XS coupler adapter. SeeSense also offer a SPECIAL version of this part with a 1/4-20 (1/4"UNC) female thread - SLM-5XSF.The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Special SeeSense modified Swivellink SLM-5XSF Small Ball 1/4"-20 (1/4"UNC) Female Tripod Mount features a 1/4-20 (1/4"UNC) FEMALE thread designed to attach to tripods, magnetic mounting plates, etc with a standard 1/4"UNC male tripod mount. The 18.5mm ball can attach to Swivellink XS knuckles and tightened on to cameras, etc by a 11mm wide flat. For heavier cameras the SLM-5XSF can fit Standard Series Swivellink components by attaching to the SLM-2-2XS coupler adapter. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink Small XS range utilises a series of link arms to extend the reach of the mounting system between knuckle couplers. The Swivellink SLM-3XST Small XS Series Metric Tee Link allows you to create two separate branches using a SLM-290XS Tee Knuckle connector attached to the centre ball. It incorporates a 10mm diameter through hole for routing wires, cables, or small hoses. The centre ball is machined with a 10mm hole for the same purpose. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Mapir Survey3 Camera Frame Mount allows you to mount a Survey3 camera on to GoPro style 3 pronged mounting brackets and mounting systems. The frame mount consists of the green plastic frame only (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLE SPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Mapir Survey3 Camera hard case allows you to protect your camera in an all weather waterproof enclosure. The case is waterproof to a depth of 30 metres (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
This Mapir Single Static mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 1 or 2 drone whilst keeping the original camera installed. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to a DJI Mavic 2 Pro / Zoom / Enterprise drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This Mapir Tilted mount enables users to attach a single Survey3 camera on to a DJI Mavic Pro drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Tilting mount allows you to easily attach a Mapir Survey3 camera securely to a DJI Phantom 3 Pro or Advanced drone whilst keeping the original camera installed. A mounting plate is included which replaces the DJI Phantom 3 top plate used by the drone. The mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
This Mapir Tilted mount allows you to easily attach a single Mapir Survey3 camera securely to an Auto EVO drone whilst keeping the original camera installed. It features a simple four screw installation making it easy to remove and transport. The mount features the camera in a tilted position for more reliable imaging. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
MAPIR Lens Protectors using an optically flat glass filter to protect the lens of Mapir Survey3 camera as well as fitting on any 22.5mm filter thread. Manufactured to resist the harshest environments the Lens Protector is a two part system consisting of a threaded clear glass abrasion resistant (AR) filter and a lens slip mount surround which fastens to the camera lens with 3 opposing set screws. MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Mapir Survey3 Camera Clip allows you to retain one Survey3 camera on to Mapir static drone mount. Whenever you purchase a Mapir Static Mount from SeeSense this camera clip is included where required. However it is recommended to keep a spare in case you lose one! MAPIR - MAPPING THE INVISIBLEIN STOCK -
This standard GPS receiver uses a cheaper ublox UBX-G7020-KT chip inside to provide a quick GPS fix for the MAPIR Survey3 camera. Our Mapir camera systems are now supplied with the advanced GPS receiver for improved performance. When the camera has satellite lock it will beep 6 times. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Spare 5 volt, 1200 mAh, 4.44Wh battery for MAPIR Survey3 camera. A battery is supplied with the camera but it is advisable to have a spare! MAPIR - MAPPING THE INVISIBLE IN STOCK -
Use this compact battery charger to charge up to two Survey3 batteries using any available USB port. Input power is via a Mini USB 5V / 2. Output is 2 x 4.2V / 0.75 Amps to the batteries. BATTERIES ARE NOT INCLUDED! MAPIR - MAPPING THE INVISIBLE IN STOCK -
Set of 4 replacement medium hardness dampening balls for MAPIR camera mounts. These balls are standard on all Mapir static camera mounts that utilise 4 balls for vibration dampening. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Bushman Panoramic Little Feet comprises three 38cm long telescopic aluminium legs designed to attach to the Bushman Corelite and Corepole and enable them to stand freely. Little Feet can be screwed into bottom of the poles at two angles to achieve 'flat feet' or 'raised feet' to suit the terrain. Alternatively Little Feet can be screwed together to create a short 65cm Monopole with 3/8" UNC threads at each end. SPECIAL ORDER -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
Sale!
The 3Dio Free Space binaural microphone is an affordable, high-quality professional binaural microphone that fits in the palm of your hand. It comprises two Primo EM172 microphone capsules embedded inside prosthetic human ears. This allows users to capture sound just as we would naturally hear it and enable you to pinpoint the sound location in space. Single or bundle offer available IN STOCK -
Sale!
This low profile mount is used to attach M12 lenses which will not focus using the standard Back-Bone M12 to CS-mount adapter. It is compatible with all Back-Bone PRO (H8-5) modified GoPro cameras. The Low Profile Mount can be mounted flush or reversed to add more thread to the front of the camera. IN STOCK -
Bushman Panoramic offer a choice of 300 or 400g counterweight with 1/4"Male to Female adapters. They are intended to increase the stability of a Monopod and camera system by lowering its centre of gravity thus making it much less likely to fall over. Simply screw the counterweight directly on to a small tripod using the 1/4"UNC Female connection on the bottom of the counterweight, then attach the Monopod to the 1/4"UNC Male thread on top. Bushman Monopods include a counterweight; add more for increased stability. IN STOCK -
Bushman Panoramic's latest and most popular lightweight 1.54 metre telescopic monopole is the perfect solution for mounting small 360° cameras extending to 154cm making it perfect for stable 360VR videos. The Bushman V2 Monopod has a host of new features including five black anodised aluminium sections which telescope closed to a length of just 39cm making easier to transport and still support a vertical weight of up to 3 KG. Choose between the Bushman V2 Monopod STANDARD or BUNDLE options. IN STOCK -
Sale!
The CamDo Underwater WiFi Extension Cables permit an action camera's 2.4 GHz WiFi and Bluetooth signal to be extended underwater. This means that users can perform any normal remote control function such as controlling the cameras or viewing a live preview using the camera's App. No direct connection is required to a camera, Apple or Android product however the modules at each end of the cable must be mounted in close proximity to surface and underwater devices to work. As the interface is wireless, the camera's underwater housing remains un-compromised and so the system can operate down to the specified operational depth of the housing. The cables are currently available from SeeSense in 7, 15 and 38 metre lengths. IN STOCK -
MAPIR offer a comprehensive range of tilting and static drone mounts for payloads of up to four MAPIR 3 cameras. These include two lightweight static generic mounts allowing you to attach a Mapir Survey 3 camera on to any drone with the payload capacity. The mount includes the camera clips and features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Advanced GPS/GNSS receiver for the MAPIR Survey3 camera is included as standard with all MAPIR Survey3 cameras supplied by SeeSense. The Advanced GPS receiver provides increased image geolocation accuracy compared to the Standard GPS receiver thanks to the newer U-blox NEO-M8 module. If you require longer and / or dual cables please look at the USB cables HERE. MAPIR - MAPPING THE INVISIBLEIN STOCK -
There are seven mounts available to attach MAPIR Survey3 cameras securely on to 3DR Solo drones with a combination of Single, Dual or Quad camera with Static or Tilting Mount options. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
Four different mounts are available to attach MAPIR Survey3 cameras securely on to the DJI Phantom 4 Pro and Advanced drones. These comprise a combination of Single or Dual camera with Static or Tilting Mounts. Each mount comes with camera clips and features a simple four screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLE IN STOCK -
There are two mounts available to attach MAPIR Survey3 cameras securely on to the DJI Inspire 2 drone with Tilting Single or Dual camera Mounts. Each mount comes with camera clips and features a simple two screw installation making it easy to remove and transport. These mounts feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. MAPIR - MAPPING THE INVISIBLEIN STOCK