-
Sale!
The CamDo Underwater WiFi Extension Cables permit an action camera's 2.4 GHz WiFi and Bluetooth signal to be extended underwater. This means that users can perform any normal remote control function such as controlling the cameras or viewing a live preview using the camera's App. No direct connection is required to a camera, Apple or Android product however the modules at each end of the cable must be mounted in close proximity to surface and underwater devices to work. As the interface is wireless, the camera's underwater housing remains un-compromised and so the system can operate down to the specified operational depth of the housing. The cables are currently available from SeeSense in 7, 15 and 38 metre lengths. IN STOCK -
SeeSense USB-C to USB-C 70cm OTG cable system designed to connect a CamDo UpBlink intervalometer to GoPro HERO 10, 11 & 12 cameras. This new improved cable is labelled "UP" to show which end of the cable connects to the UpBlink ("UP" also means this way up). This cable is also supplied with CD-180319K UpBlinks for use with GoPro Hero 10, 11 & 12 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
This custom fully pinned USB-C to USB-C cable from CamDo Solutions is designed for use with the CamDo UpBlink intervalometer connecting to GoPro HERO 5, 6 7 and 8 cameras. The cable is 30cm long and allows a CamDo UpBlink intervalometer to interface with a GoPro camera. This cable is also supplied with CD-180310K UpBlink kits for use with GoPro Hero 5 - 8 cameras and Back-Bone modified equivalents. Contact SeeSense for Further Information IN STOCK -
This custom Sony Multiport to USB-C cable from CamDo Solutions is designed for use with UpBlink to allow control of compatible Sony DSC-RX0 and DSC-RX0 II cameras. The cable is 15cm long and can be used as an upgrade purchase if you already own an UpBlink with cable for GoPro cameras. Simply update the CamDO UpBlink firmware to the latest version and now you can capture ling-term time-lapse with the superior Sony DSC-RX0 camera. Contact SeeSense for Further Information IN STOCK -
This custom OTG cable is used for updating Blink firmware. It enables the Blink to act as the host, with the USB flash drive as a peripheral that can be accessed by Blink to update the controller from a file on the drive. The USB-A connection is used to power the Blink Intervalometer and flash drive.Contact SeeSense for Further InformationLIMITED REMAINING STOCK -
Replacement Canon EXC-3 Series Camera - Control Unit cables are high quality flexible cables available in 3, 6, 10 or 15 metre lengths. They should be used with Canon (formerly Toshiba) IK-4K, IK-HD5, IK-HD3 and IK-HR3 cameras. -
Mapir have a range of cables for the Advanced GPS Receiver including 20 or 50cm cables attaching on single or dual camera systems. These Advanced GPS cable are useful if either your cable becomes damaged, you wish to modify the GPS unit by attaching to two cameras, or you require a longer cable you can order the cables by themselves! MAPIR - MAPPING THE INVISIBLE IN STOCK -
Send a PWM (pulse width modulation) signal from a drone to perform various functions via the HDMI connector on a Mapir Survey3 camera. Cables are available in lengths of 20 or 50cm and for single or dual camera operation. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Use this cable to power a Survey3 camera through the USB port and view the live image from the camera from the First Person View (FPV). The cables are available in lengths of 20 or 50cm and for single or dual camera operation. MAPIR - MAPPING THE INVISIBLEIN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 30cm USB 2.0 braided cables manufactured by Sunguy come with a USB-A Right Angle and USB-C Right Angle connector. These cables have been previously used in demonstration kits and are in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 30cm USB 2.0 braided cables manufactured by Sunguy come with a USB-A Right Angle and Micro USB Right Angle connector. These cables have been previously used in demonstration kits and are in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 0.2m USB 2.0 PVC cables come with a USB-A and USB-C connector. These cables are branded Noxgear and are in new A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 0.3m USB 2.0 White PVC cables come with a USB-A and USB-C connector. These cables are brand new and in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 0.5m USB 2.0 cables come with a USB-A and USB-C connector. These cables are brand new and in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 1.0m USB 2.0 cables come with a USB-A and USB-C connector. These cables are brand new and in A1 condition. Available while stocks last. IN STOCK -
Sale!
High quality low cost USB cables to clear. We can't throw anything away since we believe in recycling products which can be useful for other people. These 1.0m USB 2.0 cables come with a USB-C and USB-C connector. These cables are brand new and in A1 condition. Available while stocks last. IN STOCK -
Voltaic Systems supply a series of extension cables with waterproof connectors which are primarily designed for connecting their solar panels to a battery. These standard cables are available in lengths of 30cm (1 foot), 1.25m (4 feet) or 3m (10 feet). The incorporate a 3.5 x 1.1mm male and female connector. These connectors also have a shroud which slides over the mating connector to make the cable totally waterproof. IN STOCK -
Voltaic Systems supply a splitter cable which is primarily designed for connecting two of their solar panels to a battery. The splitter cable also integrates directly with Voltaic extension cables. The cable features a 3.5 x 1.1mm male which splits to feed TWO 3.5 x 1.1mm female connectors. The female connectors also have a shroud which slides over the mating connector to make the cable totally waterproof. IN STOCK -
Voltaic Systems have a 5V Regulator USB cable that connects directly to any Voltaic Systems 6 Volt solar panel allowing you to safely charge any USB device, smartphone, or tablet directly from the sun. No battery pack is required, simply charge using your device's USB charging cable. Nice and simple - NO ELECTRONICS REQUIRED! IN STOCK -
The Bushman Camera Holder features a 1/4"-12 UNC male tripod mounting thread that can be screwed directly into the tripod mount of a small camera allowing you to attach it to a strap or small carabiner clip. Keep your action camera, or VR camera safe by wearing it around your neck. The Camera Holder features a rubber pad to help hold the camera tight and protect it from being scratched by the camera holder. IN STOCK -
Use this compact battery charger to charge up to two Survey3 batteries using any available USB port. Input power is via a Mini USB 5V / 2. Output is 2 x 4.2V / 0.75 Amps to the batteries. BATTERIES ARE NOT INCLUDED! MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
The Bushman Monkey Clamp is a simple device that allows you to attach cameras and other equipment securely. The jaws can open to a maximum width of 40mm and have a rubber cover to protect and grip on the surfaces the clamp is attached to. The bracket features 1/4 and 3/8"UNC female standard tripod mounts. IN STOCK -
The Swivellink SLM-CB Table Clamp can be used to mount any Swivellink system on to the edge of a table between 16mm and 35mm thick. A screw with a plastic knob is used to tighten the SLM-CB. Machined from aluminium it includes a variety of drilled holes for fastening Swivellink SLM-1 or SLM-1XS bases to the Table Clamp Base. CONTACT US regarding your requirement IN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
The Swivellink SLM-2 metric grey standard knuckle uses a double socket configuration to clamp to the ball of a standard base, standard link, or standard sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2-2XS is a cross-over metric knuckle adapter designed to connect Standard to XS Series Fittings. It uses a double socket configuration to clamp to the ball of a Standard or XS base, link, or small sensor mount depending on the connection end utilised. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-290 Standard series metric knuckle is designed as a tee connector working in conjunction with the Standard series SLM-3T Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS small metric grey standard knuckle uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS90 small metric grey standard knuckle is designed as a tee connector working in conjunction with the XS series SLM-3XST Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Bushman Panoramic offer a choice of 300 or 400g counterweight with 1/4"Male to Female adapters. They are intended to increase the stability of a Monopod and camera system by lowering its centre of gravity thus making it much less likely to fall over. Simply screw the counterweight directly on to a small tripod using the 1/4"UNC Female connection on the bottom of the counterweight, then attach the Monopod to the 1/4"UNC Male thread on top. Bushman Monopods include a counterweight; add more for increased stability. IN STOCK -
The MAPIR T3-R125 Diffuse Reflectance Calibration Ground Target Package contains a series of 4 reflectance targets with known reflectance curves. UNLIKE drone "sunlight sensors" this target allows users to obtain accurately repeatable calibrated images through the seasons and in differing weather / lighting conditions. This target can be used for calibrating images with Mapir and any other brand of multispectral camera. A smaller T3-R50 target is also available. Before commencing a crop mapping survey cameras should capture an image of the entire target. This can then be used to help calibrate images captured in the image processing software. We therefore highly recommend that you purchase the Mapir Camera Reflectance Calibration Target to complete your system. MAPIR - MAPPING THE INVISIBLEIN STOCK DISCOUNTED PRICING AVAILABLE IN OUR MAPIR BUNDLES - CONTACT US
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu