-
The metric grey SLM-5 blank mounting plate is designed to accommodate a range of different equipment on to a plate. This includes drillings to accommodate the SLM-1 and SLM-1XS Ball Base plus a slot to accommodate the exit of cables, wire or pipes that have passed through the centre of the Swivellink system. Four M5 x 14 socket cap setscrews are included for attaching the SLM-1 and SLM-1XS. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The metric grey SLM-6 blank mounting plate is designed so you can drill and mount your equipment on to a plate. The SLM-6 includes drillings to accommodate the SLM-1 Standard Ball Base plus a slot to accommodate the exit of cables, wire or pipes that have passed through the centre of the Swivellink system. Four M5 x 14 socket cap setscrews are included for attaching the SLM-1. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-6XS Small Metric XS Series Blank Mounting Plate is designed so you can drill and mount your equipment on to a plate. The SLM-6XS includes drillings to accommodate the SLM-1XS Small Ball Base in a choice of two positions. Two M5 x 12 socket cap setscrews are included for attaching the SLM-1XS. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-4 Button Mount enables you to fit a push button into your system. For example a machine might require the provision of a cycle start or emergency stop button. The SLM-4 is threaded M30 x 1.5 and has plenty of room for the cable connection inside. The robust design allows for a large range of motion while maintaining the cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement -
The Canon IK-HR3 camera has super compact remote head outputting FULL NATIVE HD video from a single 1/2.9" CMOS sensor. This feature rich compact camera provides amazingly sharp detail and exceptional colour performance enhancing applications including life sciences, scientific imaging, diagnostics and aerospace. Also available with an optional ultra-miniature Canon IK-HD3H 3-CMOS camera head. Because of the specialist nature of this camera please contact us for current pricing and for a quotation. -
The Swivellink SLM-CB Table Clamp can be used to mount any Swivellink system on to the edge of a table between 16mm and 35mm thick. A screw with a plastic knob is used to tighten the SLM-CB. Machined from aluminium it includes a variety of drilled holes for fastening Swivellink SLM-1 or SLM-1XS bases to the Table Clamp Base. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-570XS-GP Small XS Series Metric GoPro Mount allows you to attach any device with a standard blade type GoPro mount. This makes Swivellink an ideal high quality mounting system for action cameras of all kind. As well as standard GoPro cameras and housings this mount enables you to directly attach the BackBone H8PRO modified Hero8 Black camera. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Bushman Panoramic Popeye Magnetic Bases are composed of a series of powerful rare earth magnets sealed in black rubber to protect metal surfaces from scratching. In the centre is a 1/4" UNC male standard tripod mount thread upon which many different mounting solutions can be attached. They are available with a pull force of 45kg (Popeye) and 12kg (Baby Popeye). IN STOCK -
The Bushman Panoramic Bender is an arm with double ball head with 1/4" threads designed specifically to allow unlimited adjustment in any direction to the angle of a small VR camera mounted on to a Bushman Panoramic Monopod or Popeye. Each of the two ball heads features an O-ring to prevent any movement from vibration, and can rotate in an arc of up to 260 degree. Both ball heads are locked by a single clamp. IN STOCK -
The Entaniya HAL220 range of 220° 8K resolution fisheye lenses enables the capture of unique wide-angle images well beyond a normal field of view. Despite having a 220° angle of view, the lens quality reveals few aberrations or fringing making it one if the best quality fisheye lenses in the world. The Entaniya HAL 220 PL-mount lens features interchangeable spacers to provide an optimised coverage of a wide range of large format camera sensors with an image circle from 22.6 - 29.8mm diameter. Two adjustable iris options are available. Please contact us or refer to the datasheet tab for technical details including sensor coverage and image circle information. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
The Entaniya HAL250 range of 250° 8K resolution fisheye lenses enables the capture of unique wide-angle images well beyond a normal field of view. Despite having a 250° angle of view, the lens quality reveals few aberrations or fringing making it one if the best quality fisheye lenses in the world. The Entaniya HAL 250 4.3mm lens is designed to suit a φ17mm Image Circle and is compatible with a wide range of cameras. It is available with a EF and Sony E mount and features interchangeable fixed Aperture Rings, Neutral Density filters and rear objective. Please contact us or refer to the datasheet tab for technical details including sensor coverage and image circle information. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
The Entaniya HAL250 range of 250° 8K resolution fisheye lenses enables the capture of unique wide-angle images well beyond a normal field of view. Despite having a 250° angle of view, the lens quality reveals few aberrations or fringing making it one if the best quality fisheye lenses in the world. The Entaniya HAL 250 6.0mm lens is designed to suit a φ23.7mm Image Circle and is compatible with a wide range of cameras. It is available with a EF and Sony E mount and features interchangeable fixed Aperture Rings, Neutral Density filters and rear objective. Please contact us or refer to the datasheet tab for technical details including sensor coverage and image circle information. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
The Bushman Panoramic 1/4″ Spacer is ideal when you need to raise a camera or accessory by around 50mm. The 1/4" Spacer was designed for use with Bushman Panoramic Monopods, Corepoles, tripod, or magnetic bases. It is equally at home integrating with any mounting system that utilises 1/4"UNC thread such a Swivellink equipment available from SeeSense. Ideal for use with VR cameras, miniature cameras, compact lighting systems, etc. IN STOCK -
The Bushman Camera Holder features a 1/4"-12 UNC male tripod mounting thread that can be screwed directly into the tripod mount of a small camera allowing you to attach it to a strap or small carabiner clip. Keep your action camera, or VR camera safe by wearing it around your neck. The Camera Holder features a rubber pad to help hold the camera tight and protect it from being scratched by the camera holder. IN STOCK -
Bushman Panoramic Magic cable is designed for USB A power featuring feeding to a magnetic terminal with 3 in 1 choice of connectors. This allows you to attach 3 different ends to it – Micro USB-B, USB-C, and Apple Lighting. The standard 20cm cable was designed specifically for use with the Bushman Halo 360 Light to make it easier to connect and disconnect a range of cameras quickly and efficiently. However this and the 1m cable can be used with a wide range of other devices including your phone and other accessories where a quick release connector is useful and safer. IN STOCK -
Bushman Panoramic USB-A 90 degree to USB-C cable is designed to charge the Bushman Halo 360 Light or any other device requiring a USB-C power cable. This high quality braided cable measures 50cm long and incorporates metal bodied connectors. IN STOCK -
The Bushman Panoramic Halo Bracket is designed to mount any twin sensor 360° VR camera between two Bushman Panoramic Halo 360 lights which provides enhanced lighting to the scene. The bracket is purpose designed so it along with the Halo lights do not intrude in the image. Simply position the camera so the two lenses are at right angle to the bracket and telescope the bracket to fit your camera. Further details below. IN STOCK -
The Bushman Panoramic Corepole is as a 190cm long carbon fibre telescopic pole designed for larger VR cameras whilst hiding unsightly cables inside. The ideal is that unsightly cables ruin image quality in VR360 and VR180 videos and images. This solution keeps them hidden whilst providing a strong and stable support for the camera. Bushman Corepole BUNDLE also available. SPECIAL ORDER -
Sale!
The Bushman Panoramic Corelite is as a 90cm long carbon fibre telescopic pole designed for larger VR cameras whilst hiding unsightly cables inside. The ideal is that unsightly cables ruin image quality in VR360 and VR180 videos and images. This solution keeps them hidden whilst providing a strong and stable support for the camera. SPECIAL ORDER -
Bushman Panoramic Little Feet comprises three 38cm long telescopic aluminium legs designed to attach to the Bushman Corelite and Corepole and enable them to stand freely. Little Feet can be screwed into bottom of the poles at two angles to achieve 'flat feet' or 'raised feet' to suit the terrain. Alternatively Little Feet can be screwed together to create a short 65cm Monopole with 3/8" UNC threads at each end. SPECIAL ORDER -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
Sale!
This wide angle S-mount (M12) 5MP IR (no IR cut filter) lens has a focal length of 4.0mm. It features a 91° horizontal angle of view when fitted on cameras with 1/2.3" sensors and benefits with a F1.8 fixed aperture. IN STOCK -
This wide angle S-mount (M12) 10MP 4K resolution low distortion lens has a focal length of 4.4mm. It features a 71° horizontal angle of view when fitted on camera sensors up to 1/2" and has a F2.0 fixed aperture. -
Sale!
This wide angle S-mount (M12) 2MP low distortion lens has a focal length of 4.5mm. It is designed for MACRO applications features a 78° horizontal angle of view when fitted on cameras with 1/2.3" sensors and benefits with a F1.6 fixed aperture. IN STOCK -
This S-mount (M12) 12MP 4K resolution lens has a focal length of 5.4mm. It features a 60° horizontal angle of view when fitted on camera sensors up to 1/2.3" and has a F2.8 fixed aperture. IN STOCK -
The NEW Back-Bone H12PRO is a professionally modified version of GoPro's FLAGSHIP Hero 12 Black 5.3K / 27MP camera with 1/1.9" 8:7 format sensor. The Back-Bone H12PRO enables users to fit interchangeable C-mount, CS-mount and S-mount (M12) lenses. MFT-mount is available separately.
Used by professionals and amateurs in all industries this camera really makes a GoPro Go-Professional. The NEW camera comes complete with case, original GoPro accessories, and a whole host of accessories from Back-Bone including a three point Tripod Mount.
IN STOCK -
The BackBone RX0 II PRO Camera Package is built on the the superb Sony DSC-RX0 II action camera. The premium quality aluminum components help keep the camera cool for extended shooting! The RX0 II camera takes advantage of the camera's industry leading features and quality, only now the choice of lens is up to you! FIT MANUAL C-MOUNT OR MFT-MOUNT LENS LENSES ON TO THE CAMERA.
DIY mod kit also available - SeeSense can modify your camera as well - CONTACT US for details IN STOCK -
The Back-Bone H11PRO is a professionally modified version of GoPro's Hero 11 Black 5.3K / 27MP camera with 1/1.9" sensor. The Back-Bone H11PRO enables users to fit interchangeable MFT-mount, C-mount, CS-mount and S-mount (M12) lenses.
Used by professionals and amateurs in all industries this camera really makes a GoPro Go-Professional. The NEW camera comes complete with case, original GoPro accessories, and a whole host of accessories from Back-Bone including a three point Tripod Mount.
-
Sale!
The Back-Bone H7PRO is an affordable professionally modified GoPro Hero7 Black Camera Package compatible with interchangeable C-mount , CS-mount and S-mount (M12) lenses. Most other popular lens types can be mounted with optional adapters. Built on the the superb new GoPro Hero7 Black camera, BackBone's H7PRO takes advantage of the camera's industry leading features and quality, only now the choice of lens is up to you! Used by professionals and amateurs in all industries this camera really makes a GoPro Go-Professional.
SPECIAL ORDER -
Built on the the superb Sony DSC-RX0 II and DSC-RXO action cameras, this Ribcage modification kit from Back-Bone takes advantage of the camera's industry leading features and quality, only now the choice of lens is up to you! This high grade aluminium modification kit allows users to FIT MANUAL 1" or 1.1" C-MOUNT OR MFT-MOUNT LENS LENSES ON TO THE CAMERA (N.B. The MFT mount is passive for manual iris lenses only). A passive MFT and C-Mount, standard 1/4-20 and 3/8-16 tripod mount, and removable IR-Cut filter are included to allow the camera to be utilised fro a broad range of different applications. N.B. If you are not confident about converting your camera SeeSense also offer a modification service. IN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu