-
The ARGUS mast mounting bracket allows you to attach any ARGUS housing or solar panel on to a lamp post, mast, aerial post, etc by securing it with band camps (Jubilee clips). The bracket allows you to tilt the housing to the desired position before being locked into place with a clamping nut and bolt arrangement. Pan movement is also achievable by loosening the band clamp. Please Note - band clamp is not included The ARGUS range of housings and mounts are perfect for a wide range of applications and already sees regular use for long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. -
The Swivellink SLM-1 standard metric grey ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions or directly on to the mounting point of choice. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-1XS Small metric grey ball base features two 5mm holes spaced at 25mm for attaching to your preferred base material. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Bushman Panoramic THAT SPIKE is an 11cm spacer piece for the Bushman Corepole, Corelite and any tripod that raises the camera above the pole to enable easy attachment to plugs for attachment of cables beneath the camera. VR cameras such as the Labpano Pilot Era have electrical connections beneath the camera which can be inaccessible if the camera is attached directly to a standard tripod mount or monopole. THAT SPIKE raises the camera from the tripod or pole and gives unhindered access. IN STOCK -
Bushman Panoramic Little Feet comprises three 38cm long telescopic aluminium legs designed to attach to the Bushman Corelite and Corepole and enable them to stand freely. Little Feet can be screwed into bottom of the poles at two angles to achieve 'flat feet' or 'raised feet' to suit the terrain. Alternatively Little Feet can be screwed together to create a short 65cm Monopole with 3/8" UNC threads at each end. SPECIAL ORDER -
The Bushman Panoramic Corepole is as a 190cm long carbon fibre telescopic pole designed for larger VR cameras whilst hiding unsightly cables inside. The ideal is that unsightly cables ruin image quality in VR360 and VR180 videos and images. This solution keeps them hidden whilst providing a strong and stable support for the camera. Bushman Corepole BUNDLE also available. SPECIAL ORDER -
Sale!
The Bushman Panoramic Corelite is as a 90cm long carbon fibre telescopic pole designed for larger VR cameras whilst hiding unsightly cables inside. The ideal is that unsightly cables ruin image quality in VR360 and VR180 videos and images. This solution keeps them hidden whilst providing a strong and stable support for the camera. SPECIAL ORDER -
Bushman Panoramic's latest and most popular lightweight 1.54 metre telescopic monopole is the perfect solution for mounting small 360° cameras extending to 154cm making it perfect for stable 360VR videos. The Bushman V2 Monopod has a host of new features including five black anodised aluminium sections which telescope closed to a length of just 39cm making easier to transport and still support a vertical weight of up to 3 KG. Choose between the Bushman V2 Monopod STANDARD or BUNDLE options. IN STOCK -
This is the latest and by far the most advanced and versatile VR monopod on the market. It is purpose designed for professionals but equally useful for anyone with a VR camera who wants the best! The Bushman Monopod PRO has plenty of new and innovative features that we think you will love. A 500 gramme counterweight keeps the centre of gravity as low as possible and be attached below the tripod for added stability. Positioning the camera has never been easier with a new two position tripod and a series of faces machined on the counterweight allowing the monopod to fit at angles of 10°, 25° or 45°. Bushman Popeye magnetic bases can also be attached to the tripod feet or to the side of the Bushman Monopod PRO. Also available as Bushman Monopod PRO bundle with three Popeye magnetic bases, Money Clamp, Space and Ground Spike all stored in a protective bag. IN STOCK -
Bushman Panoramic Popeye Magnetic Bases are composed of a series of powerful rare earth magnets sealed in black rubber to protect metal surfaces from scratching. In the centre is a 1/4" UNC male standard tripod mount thread upon which many different mounting solutions can be attached. They are available with a pull force of 45kg (Popeye) and 12kg (Baby Popeye). IN STOCK -
Bushman Panoramic's new HALO 360° light is a unique high quality portable lighting solution especially designed for 360° video. The Halo features a super bright diffused 360° light with five levels of brightness and three different colour temperatures to suit most VR applications. It is easy to use, having three push buttons to control functions and a USB connector for charging. An output with a Magic Cable including three interchangeable magnetic connectors for powering an external device, most usually a camera. A Halo Bundle is also available. Perfect for Building Inspection and Virtual Tours. IN STOCK -
The Bushman Panoramic Compass Level is a new and innovative product designed to assist and improve VR photography. Firstly there is a compass; this allows you to obtain a reference point when taking multiple images in a VR tour. The second feature is a bubble level which can be used in instances when you require your equipment to be set up in a stable and level position. This is the perfect accessory to own if you are creating virtual tours. IN STOCK -
The Mapir Survey3 Camera hard case allows you to protect your camera in an all weather waterproof enclosure. The case is waterproof to a depth of 30 metres (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
The 3Dio Grip Handle is perfect for the hand-held operation of any 3Dio microphone. It is a convenient alternative mounting your 3Dio microphone on to tripod or mic stand but can also be sued with our Back-Bone cameras or Bushman monopod. It features a rubber handle, 1/4" Male thread for attaching to the microphone and 1/4" Female tripod thread to fit to on to a tripod, monopod or mic stand along with an optional circular split cotter "keyring"attachment. The 3Dio grip handle is perfect for field recording and situations where a microphone will be hand held. IN STOCK -
Bushman Panoramic offer a choice of 300 or 400g counterweight with 1/4"Male to Female adapters. They are intended to increase the stability of a Monopod and camera system by lowering its centre of gravity thus making it much less likely to fall over. Simply screw the counterweight directly on to a small tripod using the 1/4"UNC Female connection on the bottom of the counterweight, then attach the Monopod to the 1/4"UNC Male thread on top. Bushman Monopods include a counterweight; add more for increased stability. IN STOCK -
The Swivellink SLM-2XS90 small metric grey standard knuckle is designed as a tee connector working in conjunction with the XS series SLM-3XST Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS small metric grey standard knuckle uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-290 Standard series metric knuckle is designed as a tee connector working in conjunction with the Standard series SLM-3T Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2-2XS is a cross-over metric knuckle adapter designed to connect Standard to XS Series Fittings. It uses a double socket configuration to clamp to the ball of a Standard or XS base, link, or small sensor mount depending on the connection end utilised. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2 metric grey standard knuckle uses a double socket configuration to clamp to the ball of a standard base, standard link, or standard sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
The Swivellink SLM-CB Table Clamp can be used to mount any Swivellink system on to the edge of a table between 16mm and 35mm thick. A screw with a plastic knob is used to tighten the SLM-CB. Machined from aluminium it includes a variety of drilled holes for fastening Swivellink SLM-1 or SLM-1XS bases to the Table Clamp Base. CONTACT US regarding your requirement IN STOCK -
The Bushman Monkey Clamp is a simple device that allows you to attach cameras and other equipment securely. The jaws can open to a maximum width of 40mm and have a rubber cover to protect and grip on the surfaces the clamp is attached to. The bracket features 1/4 and 3/8"UNC female standard tripod mounts. IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
The Bushman Camera Holder features a 1/4"-12 UNC male tripod mounting thread that can be screwed directly into the tripod mount of a small camera allowing you to attach it to a strap or small carabiner clip. Keep your action camera, or VR camera safe by wearing it around your neck. The Camera Holder features a rubber pad to help hold the camera tight and protect it from being scratched by the camera holder. IN STOCK -
Sale!
This discounted bundle* comprises a MAPIR Survey3 camera system complete with a Calibration Target and accessories. This bundle* comprises:This SeeSense bundle varies slightly from the bundle solution offered by MAPIR, further details below or in individual product descriptions. Drone mount bundle options are also available. Please contact us if you do not see what you need. MAPIR - MAPPING THE INVISIBLE IN STOCK -
Sale!
This discounted bundle includes everything required for a MAPIR Survey3 camera system to operate with the Inspire 1 drone. This bundle* comprises:*This SeeSense bundle varies slightly from the bundle solution offered by MAPIR, further details below or in individual product descriptions. Other drone mounting options are available. Please contact us if you do not see what you need. MAPIR - MAPPING THE INVISIBLE IN STOCK -
Sale!
This discounted bundle includes everything required for a MAPIR Survey3 camera system to operate with the DJI Phantom 4, Pro or Advance drone. This bundle* comprises:*This SeeSense bundle varies slightly from the bundle solution offered by MAPIR, further details below or in individual product descriptions. Other drone mounting options are available. Please contact us if you do not see what you need. MAPIR - MAPPING THE INVISIBLE IN STOCK -
Sale!
This discounted bundle includes everything required for a MAPIR Survey3 camera system to operate with the DJI Mavic 2 drone. This bundle* comprises:*This SeeSense bundle varies slightly from the bundle solution offered by MAPIR, further details below or in individual product descriptions. Other drone mounting options are available. Please contact us if you do not see what you need. MAPIR - MAPPING THE INVISIBLE IN STOCK -
Sale!
This discounted bundle includes everything required for a MAPIR Survey3 camera system to operate with the Autel EVO II drone. This bundle* comprises:*This SeeSense bundle varies slightly from the bundle solution offered by MAPIR, further details below or in individual product descriptions. Other drone mounting options are available. Please contact us if you do not see what you need. MAPIR - MAPPING THE INVISIBLE IN STOCK- Your choice of MAPIR Survey3 Wide 87° HFOV camera
- Advanced GPS receiver
- Autel EVO II single tilting mount
- Glass Lens Protector
- Reflectance Calibration Ground Target
- 64GB Micro SD card
- Spare battery and battery charger
-
Sale!
Can't be bothered picking individual items for your time-lapse project? Our CamDo time-lapse bundles save money and are designed to make life easier for you. Six Options Are Available: For Sony DSC-RX0 camera with or without Solar Panel - system allows triggering and upload - 5K final video resolution For GoPro Hero 10 - 12 cameras with or without Solar Panel - system allows triggering and upload - 5K / 5.3K final video resolution For GoPro Hero 5-8 cameras with or without Solar Panel - system allows triggering only * - 4K final video resolution * GoPro Hero 5 allows triggering and upload Each bundle includes Camera, UpBlink intervalometer, DryX weatherproof enclosure with 47Wh battery, and a swivel bracket. A solar panel is included in the SolarUp versions, and a second panel can also be mounted on the DryX enclosure and purchased here. IN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu