MAPIR offer a comprehensive range of tilting and static drone mounts for payloads of up to four MAPIR Survey3 cameras. These include a series of two lightweight mounts which allow you to attach Mapir Survey 3 cameras securely on to a DJI Inspire 2 drone whilst keeping the original camera installed.
There are two tilting mounts available for Single or Dual camera applications. These Tilting Mounts have a black thumb screw on each side that allows you to adjust the camera’s tilt angle from 0 to 10 degrees to account for the forward flying tilt. Each notch is equal to 2.5 degrees of tilt. The advantage of these mounts is that you can tilt the angle of the camera to suit the drone’s forward flight speed. For every 5m/s you are flying tilt 5 degrees (so 10m/s = 10 degrees).
For applications that use the rear underside camera to check for an unobstructed landing area (such as the DJIGO application) you may not be able to tilt the camera more than 7.5 degrees. You can of course select to force landing though with no issues from the mount. For applications that do not use the ground sensors for landing (such as DroneDeploy) you can use any tilt you require.
A Mapir Survey 3 camera clip is included for each camera. These mounts also feature a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera. You can remove the vibration dampening balls and rotate the camera plate 90 degrees if desired. Each mount also features a simple two screw installation making it easy to remove and transport.
Optional lens protectors are recommended to protect the camera lenses from flying debris during take-off and landings.