-
MAPIR Survey3 multispectral cameras come with a range of six filter options and enable farmers, agriculturalists, etc to effectively manage crops, soil, fertilising, irrigation, etc. MAPIR cameras are widely used for checking a wide range of vegetation, mineral & burn indices. The Survey3 W series camera range feature a wide angle 87° lens and are supplied complete with MAPIR's advanced GPS module. We also stock the standard Survey3 N camera with a narrower angle 41° lens. The MAPIR Calibration Ground Target is highly recommended to provide a highly accurate calibrated reflectance values for captured media. MAPIR - MAPPING THE INVISIBLE IN STOCK CONTACT US FOR AVAILABILITY -
Sale!
MAPIR Survey3 multispectral cameras come with a range of six filter options and enable farmers, agriculturalists, etc to effectively manage crops, soil, fertilising, irrigation, etc. MAPIR cameras are widely used for checking a wide range of vegetation, mineral & burn indices. The Survey3 N series camera range feature a narrow 41° lens and are supplied complete with MAPIR's advanced GPS module. We also stock the standard Survey3 W camera with wide angle 87° lens. The MAPIR Calibration Ground Target is highly recommended to provide a highly accurate calibrated reflectance values for captured media. MAPIR - MAPPING THE INVISIBLE IN STOCK CONTACT US FOR AVAILABILITY
-
The Marshall CV226 is a compact, rugged and versatile Full High Definition Lipstick camera which benefits from an IP67 rated waterproof housing and 3G-SDI output. The camera accepts interchangeable M12 (S-mount) lenses but comes fitted with a 3.6mm 72 degree HFOV lens as standard. The CV226 delivers high quality images from a very compact 62.5 x 19.5mm footprint, menu controlled by a toggle switch on the camera breakout cable or RS485 Sony Visca, and compatible for use with the Marshall CVRCP-V2 Remote Control Panel. CONTACT SeeSense for lens options and advice. -
The Marshall CV344 is a compact, rugged and versatile Full High Definition Broadcast camera which benefits from 3G-SDI output capable of being . The camera accepts interchangeable C or CS-mount lenses and includes a connection for DC auto-iris lenses. The CV344 delivers high quality images from a very compact 59 x 56 x 56mm footprint and also features a comprehensive menu which can be controlled from a toggle switch or RS485 Sony Visca. It is also compatible for use with the Marshall CVRCP-V2 Remote Control Panel. CONTACT SeeSense for lens options and advice. -
The Marshall CV346 is a compact, rugged and versatile Full High Definition Broadcast camera which benefits from 3G-SDI and HDMI simultaneous outputs delivering high quality images from a compact 59 x 56 x 56mm footprint. It also features a comprehensive menu which can be controlled from a toggle switch or RS485 Sony Visca. The camera accepts interchangeable C or CS-mount lenses. CONTACT SeeSense for lens options and advice. -
The Marshall CV506 is a compact, rugged and versatile Full High Definition Broadcast camera which benefits from 3G-SDI and HDMI simultaneous outputs delivering high quality images from a compact 55 x 44 x 40mm footprint. It also features a comprehensive menu which can be controlled from a toggle switch or RS485 Sony Visca. The camera accepts interchangeable S-mount (M12) fixed iris prime lenses with a 72° HFOV 3.6mm lens included as standard. CONTACT SeeSense for lens options and advice. -
The Peerless Creations Mini-P is a 1/4" 1-CMOS waterproof camera with a stainless steel body measuring just 19mm in diameter and with PAL or NTSC output. A choice of five lenses is available which can be focussed tool-free. It is also equipped with an adjustable six LED light providing shadowless illumination. A pigtail cable exits the camera attaching to a 4 metre cable terminating in a control and splitter box for video output and power. The combined length of these cables can be up to 36.5 metres. These cameras are used in a very wide variety of industrial and inspection applications We are awaiting full technical specifications for this camera from Peerless Creations. PLEASE CONTACT US FOR FURTHER DETAILS TECHNICAL ADVICE AND PRICING -
This Peerless Creations 15mm diameter 1/3" 1-CMOS standard definition camera head and accepts M12 (S-mount) lenses and is capable of outputting a standard definition PAL or NTSC image. A choice of tethered or detachable cable from 3m up to 30m long connects either to a power and video splitter or to an optional CCU with video output and DVR. We are awaiting full technical specification for this camera from Peerless Creations. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
This Peerless Creations 17mm diameter 1/3" 1-CMOS standard definition camera head accepts the same lenses as the long discontinued ELMO MP50H and Toshiba IK-M51H cameras and is capable of outputting a standard definition PAL or NTSC image. A choice of tethered or detachable cable from 3m up to 30m long connects either to a power and video splitter or to an optional CCU with video output and DVR. We are awaiting full technical specification for this camera from Peerless Creations. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
This Peerless Creations 15mm diameter 1/3" 1-CMOS camera head and accepts M12 (S-mount) lenses and is capable of outputting a Full HD image at up to 60 frames per second. A choice of cables up to 15m long connects to the CCU which features a user menu and a built in DVR capable of capturing MP4 video and JPEG still images via a MicroSD slot. The control unit features external mini HDMI and Analog video outputs plus a USB connector used to communicate with the MicroSD card. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
This Peerless Creations 17mm diameter 1/3" 1-CMOS camera head is a Full HD (up to 60 frames per second) replacement for ELMO MP50H and Toshiba IK-M51H lipstick / bullet camera. A choice of cables up to 15m long connects to the CCU which features a user menu and a built in DVR capable of capturing MP4 video and JPEG still images via a MicroSD slot. The control unit features external mini HDMI and Analog video outputs plus a USB connector used to communicate with the MicroSD card. PLEASE CONTACT US FOR TECHNICAL ADVICE AND PRICING -
Sale!
A good home needed! We have a few second hand cameras in the office that we can't bring ourselves to scrap because they are in such good condition. Instead we are offering them at a bargain price so we know they can continue their good service! The Toshiba IK-TU63 is a super compact remote head PAL camera that has been out of production for many years. In its day it was the best quality remote head camera on the market and was used in many ground breaking and innovative applications in the broadcast industry. Today their high quality standard definition output still makes them perfect for industrial inspection applications as well as situations where size counts and full HD or 4K resolution in not so important. We are offering a complete camera system comprising IK-TU63 1/3" 3-CCD camera head with lens, 10m cable, IK-TU61 CCU, and power supply. Every system has been functionally tested and we think they are in great condition considering their age!A VERY SPECIAL PRICE (YES that is the original cost of the camera system!) Sold as seen. LIMITED STOCK -
The Watec WAT-240E is a 18mm diameter 1/4"CMOS colour lipstick cameras with 480 TVL colour CMOS image sensor for use in environments where space is limited. -
The Watec 910HX is a 570 TVL wide dynamic range camera incorporates a 1/2" Monochrome (Black & White) CCD image sensor to provide excellent low light sensitivity down to 0.000005 lux. The camera is designed to adjust to the lighting conditions of your scene using frame loss compensation. The comprehensive camera menu is full adjustable and can be pre-calibrated using a toggle switch on the rear to meet the requirements user requirements. -
The Watec 933 is a Full HD Low Light IP Network Camera incorporating a 1/2.8" Monochrome (Black & White) CCD image sensor to provide excellent low light sensitivity down to 0.0001lux. The comprehensive camera menu is full adjustable via the RJ45 network interface. It also supports micro SD cards enabling stand-alone recording without the need for a network connection. The camera can be powered through a 12V DC input or via POE. -
The WVS-16-1F Colour Zoom Welding Camera System is switchable between Standard (PAL) and High Definition (AHD) outputs. It features a motorised zoom lens and LCD scene filter adjusted by a potentiometer mounted on the Camera Control Unit (CCU). When welding starts the filter is automatically triggered, enabling operators to view a sharp image of the entire scene before, during and after a welding process. The CCU controls camera zoom, focus and aperture plus two programmable preset positions and mirror for improved set up times and better detection of any welding defects. Contact us for help and more information. ASSEMBLED TO ORDER -
The WVS-16-2F Colour Zoom Welding Camera System is switchable between Standard (PAL) and High Definition (AHD) outputs. It features a motorised zoom lens and LCD scene and arc filters adjusted by a potentiometer mounted on the Camera Control Unit (CCU). When welding starts the two filters are automatically triggered, enabling operators to view a sharp image of the entire scene before, during and after a welding process. The CCU controls camera zoom, focus and aperture plus two programmable preset positions and mirror for improved set up times and better detection of any welding defects. Contact us for help and more information. ASSEMBLED TO ORDER
-
The WVS-32 Colour Welding Camera System is a Standard Definition (CFBS / FBAS) camera featuring a fixed focal length (prime) 35mm C-mount lens, with water cooling plate and a selection of mounting options. When welding commences the camera automatically adjusts exposure, enabling operators to view a sharp image of the entire scene before, during and after a welding process. A combined video / power cable is available in 5 metre increments up to 50m terminating in a splitter box for power and video. Contact us for help and more information. -
The WVS-55 is smallest welding camera solution supplied by SeeSense measuring just 20 x 20 x 18mm. It features a special monochrome (B&W) logarithmic camera sensor which automatically compensates exposure before, during and after the welding process. It is purpose designed for monitoring unpulsed TIG and plasma welding processes. A combined video / power cable is available in 5 metre increments up to 50m terminating in a splitter box. Special versions available. Contact us for help and more information.ASSEMBLED TO ORDER -
The Z CAM K2Pro VR180 5K one piece system is based on two Z CAM E2 cameras combined and fitted with Izugar MKX200 3.8mm fisheye lenses. The camera features a 15 stop dynamic range and has excellent low light performance. It has an interocular distance at 64mm guaranteeing the best stereoscopic experience and records 10-bit color in Prores 422HQ, and exports up to 5k@60 VR180 format. The tailor-made iZugar MKX200 F2.8-11 8K ready fisheye lenses provide edge to edge super sharpness with minimal distortion and chromatic aberration. -
Use this compact battery charger to charge up to two Survey3 batteries using any available USB port. Input power is via a Mini USB 5V / 2. Output is 2 x 4.2V / 0.75 Amps to the batteries. BATTERIES ARE NOT INCLUDED! MAPIR - MAPPING THE INVISIBLE IN STOCK -
The Swivellink SLM-CH Clamp Handle can be fitted Standard and XS series knuckle connectors to allow quick adjustments in arm positioning. Once set and the other setscrews are tightened the clamp handle can be removed and replaced by the standard screw, or the handle can remain in place. CONTACT US regarding your requirement IN STOCK -
The Bushman Monkey Clamp is a simple device that allows you to attach cameras and other equipment securely. The jaws can open to a maximum width of 40mm and have a rubber cover to protect and grip on the surfaces the clamp is attached to. The bracket features 1/4 and 3/8"UNC female standard tripod mounts. IN STOCK -
The Swivellink SLM-CB Table Clamp can be used to mount any Swivellink system on to the edge of a table between 16mm and 35mm thick. A screw with a plastic knob is used to tighten the SLM-CB. Machined from aluminium it includes a variety of drilled holes for fastening Swivellink SLM-1 or SLM-1XS bases to the Table Clamp Base. CONTACT US regarding your requirement IN STOCK -
Sale!
The BackBone Sidearm Connection Kit enables you to join two cameras together by connecting between two Back-Bone Sidearm mounts. This accessory is especially useful when using GoPro cameras for VR360 (Back-to-Back) applications. There are two options for mounting the camera; either horizontally or in a diagonal 'V' position for optimal use. N.B. The camera is not waterproof while the Sidearm is fitted. IN STOCK -
The Swivellink SLM-2 metric grey standard knuckle uses a double socket configuration to clamp to the ball of a standard base, standard link, or standard sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2-2XS is a cross-over metric knuckle adapter designed to connect Standard to XS Series Fittings. It uses a double socket configuration to clamp to the ball of a Standard or XS base, link, or small sensor mount depending on the connection end utilised. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-290 Standard series metric knuckle is designed as a tee connector working in conjunction with the Standard series SLM-3T Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The Standard series can easily support 13Kg utilising the 30cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS small metric grey standard knuckle uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
The Swivellink SLM-2XS90 small metric grey standard knuckle is designed as a tee connector working in conjunction with the XS series SLM-3XST Tee Link. It uses a double socket configuration to clamp to the ball of a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability. The XS series can easily support 1.4Kg utilising the 10cm link (the longest in the series) in any position. CONTACT US regarding your requirement IN STOCK -
Bushman Panoramic offer a choice of 300 or 400g counterweight with 1/4"Male to Female adapters. They are intended to increase the stability of a Monopod and camera system by lowering its centre of gravity thus making it much less likely to fall over. Simply screw the counterweight directly on to a small tripod using the 1/4"UNC Female connection on the bottom of the counterweight, then attach the Monopod to the 1/4"UNC Male thread on top. Bushman Monopods include a counterweight; add more for increased stability. IN STOCK -
The MAPIR T3-R125 Diffuse Reflectance Calibration Ground Target Package contains a series of 4 reflectance targets with known reflectance curves. UNLIKE drone "sunlight sensors" this target allows users to obtain accurately repeatable calibrated images through the seasons and in differing weather / lighting conditions. This target can be used for calibrating images with Mapir and any other brand of multispectral camera. A smaller T3-R50 target is also available. Before commencing a crop mapping survey cameras should capture an image of the entire target. This can then be used to help calibrate images captured in the image processing software. We therefore highly recommend that you purchase the Mapir Camera Reflectance Calibration Target to complete your system. MAPIR - MAPPING THE INVISIBLEIN STOCK DISCOUNTED PRICING AVAILABLE IN OUR MAPIR BUNDLES - CONTACT US -
The MAPIR T3-R50 Diffuse Reflectance Calibration Ground Target Package contains a series of 4 reflectance targets with known reflectance curves. UNLIKE drone "sunlight sensors" this target allows users to obtain accurately repeatable calibrated images through the seasons and in differing weather / lighting conditions. This target can be used for calibrating images with Mapir and any other brand of multispectral camera. A larger T3-R125 target is also available. Before commencing a crop mapping survey cameras should capture an image of the entire target. This can then be used to help calibrate images captured in the image processing software. We therefore highly recommend that you purchase the Mapir Camera Reflectance Calibration Target to complete your system. MAPIR - MAPPING THE INVISIBLEIN STOCKDISCOUNTED PRICING AVAILABLE IN OUR MAPIR BUNDLES - CONTACT US -
The Theia Technologies FMT3555 filter mount is designed to allow attachment of M55x0.75mm diameter filters to Theia Technology mid and telephoto lenses with a 35mm diameter front barrel. A special thinner version is available for Theia 12-50mm lenses.This filter mount can be added to allow an external filter (such as band-pass or polarising filter) to be added to the system. Theia lenses are of a high quality and perfect for a wide range of imaging application.
IN STOCK -
The Advanced GPS/GNSS receiver for the MAPIR Survey3 camera is included as standard with all MAPIR Survey3 cameras supplied by SeeSense. The Advanced GPS receiver provides increased image geolocation accuracy compared to the Standard GPS receiver thanks to the newer U-blox NEO-M8 module. If you require longer and / or dual cables please look at the USB cables HERE. MAPIR - MAPPING THE INVISIBLEIN STOCK -
This standard GPS receiver uses a cheaper ublox UBX-G7020-KT chip inside to provide a quick GPS fix for the MAPIR Survey3 camera. Our Mapir camera systems are now supplied with the advanced GPS receiver for improved performance. When the camera has satellite lock it will beep 6 times. MAPIR - MAPPING THE INVISIBLEIN STOCK -
The 3Dio Grip Handle is perfect for the hand-held operation of any 3Dio microphone. It is a convenient alternative mounting your 3Dio microphone on to tripod or mic stand but can also be sued with our Back-Bone cameras or Bushman monopod. It features a rubber handle, 1/4" Male thread for attaching to the microphone and 1/4" Female tripod thread to fit to on to a tripod, monopod or mic stand along with an optional circular split cotter "keyring"attachment. The 3Dio grip handle is perfect for field recording and situations where a microphone will be hand held. IN STOCK -
The Shokz OpenComm2 is a unique and special headset that utilises 'OpenEar', 'DirectPitch' and 'Bone Conduction' technology. Designed for mobile work, the OpenComm2's open-ear design keeps you connected to the world without compromising on comfort or audio quality. This headset enables you to hear sirens, traffic and what ever else is happening in your environment whilst listening to music or linked to a phone. In our opinion this means that the Shokz OpenComm2 the best and safest headset to wear for situational awareness in areas where health and safety are important. IN STOCK -
The Swivellink SLM-4MMT T-Handle is a hex wrench used to tighten all metric series knuckles and to mount metric ball bases to metric mounting plates. The 22cm extended length and T-handle enable it to access Swivellink in enclosed spaces. A plastic coated handle ensures that it is comfortable and easy to hold. CONTACT US regarding your requirement IN STOCK -
Sale!
The ARGUS IP55 rated camera housing is designed to accommodate small self contained action cameras along with any accessories required such as a battery, power supply, time-lapse intervalometer, etc. It comprises a waterproof enclosure with optically flat glass window and female 1/4" tripod mounts below . An adjustable camera mounting plate is included enabling the camera and lens to be positioned close to the housing's glass window for optimal performance. -
Sale!
The CamDo DryX weatherproof outdoor enclosure can accommodate a GoPro Hero 4 - 12 or Sony DSC-RX0 camera, intervalometer and battery. It is designed to be crush proof, air tight, UV resistant and built to survive in a hostile environment. The rear of the enclosure has a metal frame used for fastening in position. This can also accommodate a swivel bracket and up to two 9W SolarX panels also available from SeeSense. The complete system is ideal for long-time time-lapse in construction, general photography, wildlife photography or scientific research applications. IN STOCK -
The Mapir Survey3 Camera hard case allows you to protect your camera in an all weather waterproof enclosure. The case is waterproof to a depth of 30 metres (GoPro brackets and locking screws are not included). MAPIR - MAPPING THE INVISIBLESPECIAL ORDER - CONTACT US FOR AVAILABILITY -
Our SeeSense IP55 rated camera housings are designed to accommodate small self contained action cameras along with any accessories required such as a battery, power supply, time-lapse intervalometer, etc. Available in lengths of 15, 20, 25 and 30cm (see photo). They comprise a waterproof enclosure with optically flat glass window and two 15mm glands for power inputs, video outputs, etc. An adjustable camera mounting plate is included enabling the camera and lens to be positioned close to the housing's glass window for optimal performance. The housing base features two 1/4”-20 UNC standard tripod mounting points for installation directly on to a tripod or the included mounting bracket. Ideal low cost solution for a wide range of applications including long term time-lapse (e.g. construction time-lapse), outdoor research projects or simply hard wired into a standard surveillance camera system. IN STOCK (N.B. Some items may be special order) -
DISCONTINUED SUPERSEDED BY THE CAMDO UPBLINK The CamDo Blink is is a low power, WiFi enabled time-lapse intervalometer compatible with all GoPro Hero 4 and Hero 3+ Black cameras. This professional accessory helps unlock the full potential of GoPro cameras for long term time-lapse photography up to 4K resolution and includes a USB connector for external power considerably increasing the operation time of the camera. DISCONTINUED -
DISCONTINUED SUPERSEDED BY THE CAMDO UPBLINK The CamDo BLINK X is a long term lapse intervalometer designed to connect with GoPro Hero 8, 7, 6, 5 and 5 Session cameras. The design incorporates a WiFi interface which simplifies configuration of up to 10 separate schedules on the User Interface. The BlinkX can be triggered by the intervalometer or external source such as multi-camera array or an X-band motion sensor to capture single images or videos. Perfect for long term construction time-lapse DISCONTINUED -
Sale!
The CamDo UpBlink is a low power, WiFi enabled time-lapse intervalometer which is compatible with the Sony DSC-RX0 series as well as the GoPro Hero camera range. It provides a flexible, reliable and accurate means of setting different time date and frequency settings for long-term time-lapse. We do not recommend this system for frequencies less than 5 minutes. This professional accessory helps unlock the full potential of GoPro and Sony DSC-RX0 cameras for long term time-lapse photography up to 5.3K resolution. Each system includes a dedicated cable connecting the intervalometer to the camera plus an USB connector for external power considerably increasing the operation time of the camera. * Also compatible with Back-Bone modified versions of these cameras. IN STOCK -
MAPIR Lens Protectors using an optically flat glass filter to protect the lens of Mapir Survey3 camera as well as fitting on any 22.5mm filter thread. Manufactured to resist the harshest environments the Lens Protector is a two part system consisting of a threaded clear glass abrasion resistant (AR) filter and a lens slip mount surround which fastens to the camera lens with 3 opposing set screws. MAPIR - MAPPING THE INVISIBLE IN STOCK -
This super sharp S-mount (M12) 16MP(4K) lens has a focal length of 16mm featuring a 26.8° horizontal angle of view when fitted on 1/1.8" camera sensors. It has a F2.8 fixed aperture and is available with an IR cut filter fitted or removed. It is perfect for use with Back-Bone modified GoPro cameras (also supplied by SeeSense) as well as many other high quality cameras. IN STOCK
UK OFFICE: + 44 7967 445 829 | EU OFFICE: + 421 917 163 367 | sales@seesense.eu