Bundle, MAPIR DJI Phantom 4 single TILTING mount

This discounted bundle* includes everything required for a MAPIR Survey3 camera system to operate with the DJI Phantom 4, Phantom 4 Pro or Phantom 4 Advance drone.  This bundle* comprises:

• Your choice of MAPIR Survey3 Wide 87° HFOV camera
• Advanced V2 GNSS receiver 
• DJI Phantom 4  single tilting mount with camera clip
• Glass Lens Protector
• T3-R50 Reflectance Calibration Ground Target
• 64GB Micro SD card
• Spare battery and battery charger

The Tilting Mount  features a black thumb screw on each side that allows you to adjust the camera’s tilt angle from 0 to 10 degrees with each notch equal to 2.5 degrees of tilt.  The advantage of a tilting mount is that you can tilt the angle of the camera to suit the drone’s forward flight speed ensuring the camera is parallel with the ground (nadir). For every 5m/s you are flying tilt 5 degrees (so 10m/s = 10 degrees). See images above.

The Phantom 4 single tilting camera mount also features a vibration dampening system to decrease / eliminate any vibration transmitted from the drone to the camera.  Four screws make it is easy to remove from the drone and transport; a camera clip is included for the Survey3 camera.

SeeSense supply all MAPIR cameras with Advanced V2 GNSS which, in this case, can be mounted above the camera. This system can also be doubled up to a two camera system and the GNSS connect to both cameras using a split cable. Contact Us if you require the dual version. Lens protectors are recommended to protect the camera lenses from flying debris during take-off and landings.  A Diffuse Reflectance Calibration Ground Target is recommended to enable you to correctly calibrate the images captured during the flight for accurate processing. We include the T3-R50; please contact us if you prefer the larger T3-R125 target. The spare battery, charger and SD card are all useful or required for your system to operate.  If you would like to change any items in the bundle please CONTACT US.